Last updated: 5/31/23 Haley

Ultimaker S5
Tool Type: 3D printer
Location: Innovation Workshop

The Ultimaker S5 is a filament fed fusion deposition 3D printer capable of simultaneously printing two different plastics at once. Typically the printer is set up with ABS as a build material, and PVA as a solvable support material.

• The print heads can be very hot - do not touch them with bare hands unless positive they are cool.
• As with any automated machinery make sure that your body is clear of the moving parts to avoid injury.

FDM Training SOP

Ultimaker S5:

• Build Volume: 330x240x300 mm
• Filament diameter: 2.85 mm
  
• XYZ resolution: 6.9, 6.9, 2.5 micron
• Build plate temperature: 20-140 °C
• Nozzle Temperature: 180-280 °C

PVA Temps:
Extruder: 220 C Bed: Whatever structural filament recommends

ABS Temps:
Extruder: 230 C Bed: 100 C

ultimaker s5 specs
ultimaker 3 extended specs
Quick start guide
um180129_ultimaker_3_manual_rb_v12_english.pdf
https://support.ultimaker.com/hc/en-us/articles/360012007119
pva_drying_recipe.pdf
ultimaker_filaments_-_sheet1.pdf
failed_3d_print_procedure.pdf