ultimaker3_extended
This is an old revision of the document!
Table of Contents
Ultimaker 3 Extended/S5 Dual FDM 3D Printer
Description: FDM 3D Printer |
Manufacturer: Ultimaker |
About
The Ultimaker 3 extended & Ultimaker S5 are filament fed fusion deposition 3D printers capable of simultaneously printing two different plastics at once. Typically the printer is set up with ABS as a build material, and PVA as a solvable support material.
Safety Concerns
- The print heads can be very hot - do not touch them with bare hands unless positive they are cool.
- As with any automated machinery make sure that your body is clear of the moving parts to avoid injury.
- The support removal tank for the F270 is filled with heated caustic chemicals that dissolve the support material. An apron, Gloves, and a face shield must be warn when inserting and removing parts or basket from the tank.
Training Documentation
Detailed Specifications
Ultimaker 3 Extended:
- Build Volume: 215 x 215 x 300 mm
- Filament diameter: 2.85 mm
- layer resolution: 60 to 600 microns depending on print head (see Specifications documentation page 11)
- XYZ accuracy: 12.5, 12.5, 2.5 microns
- Build plate temperature: 20-100 °C
- Nozzle temperature: up to 210 °C
Ultimaker S5:
PVA Temps:
Extruder: 220 C
Bed: Whatever structural filament recommends
ABS Temps:
Extruder: 230 C
Bed: 100 C
Reference Documentation
ultimaker3_extended.1672887500.txt.gz · Last modified: 2023/01/05 02:58 by haley