This is an old revision of the document!
Table of Contents
Grizzly bench Combo Disk/Belt Sander
 |
| Tool Type: “” |
| Location: “Innovations Workshop” |
| Supervisor | Tool Lead |
| David Bothman | “WW Name” |
| (805) 893-4125 | (###) ###-#### |
| bothman@cnsi.ucsb.edu | “WW Email” |
| Description: “Combo Sander” |
| Manufacturer: “Grizzly” |
About
This bench top combination belt grinder and disk sander can be used for squaring up and cleaning up stock, but should not be used for bulk material removal as the thin belts are quickly abraded. Use a machinist square to square up the guides if sharp 90 degree corners are desired. Wood, plastic, and non ferrous metals are easily sanded. Hard materials should not be used with this tool because they abrade the sandpaper quickly.
Detailed Specifications
Belt Size: 1 x 42 inch
Disk Size: 8 inch diameter
Safety Concerns
Thin material can easily be sucked past the guide and thrown across the room. Do not operate this tool wearing gloves which can be caught between the belt and the guides. When grinding parts can quickly become incredibly hot, submerging the part periodically in water can help prevent overheating the part.
Operating Procedures
Insert Text Here!
Reference Documentation
iw_combination_sander_manual.pdf
coe_student_machine_shop_safety_handout.pdf
master_machine_tool_training_document.docx