The Bambu X1C is located in Elings 3430 next to the Ultimaker. It is an FDM printer which extrudes melted filament onto a textured build plate. Currently, it uses ABS, PLA, PETG, and TPU; all in a very limited variety of colors. It's one of our fastest printers while still maintaining a high quality.

Nozzle tip sizes: 0.2 mm nozzle, 0.4 mm nozzle, 0.6 mm nozzle
Build volume: 256 mm x 256 mm x 256 mm
X,Y accuracy: ~200 microns

X1-Carbon SOP