3d_print_water_jet_cleaning_station
This is an old revision of the document!
Table of Contents
3D print water jet cleaning station
Description: Presssure washer |
Manufacturer: Stratasys |
Last updated 1/5/23 Haley
About
This tool removes support material from parts 3D printed by the Objet 30.
Detailed Specifications
- Water consumption: less then 12 L/min
- 85-88 dB when operating
Safety Concerns
- Lid should remain latched and closed whenever the machine is on
- Water should be shut off to the machine imminently after cleaning is finished to avoid accidental flooding
- Cracked protective gloves should imminently be replaced
- Do not operate water jet outside of sealed container
Reference Documentation
3d_print_water_jet_cleaning_station.1672965050.txt.gz · Last modified: 2023/01/06 00:30 by haley