xytornix_soldering_station
This is an old revision of the document!
Table of Contents
Xytronic LF-853D Soldering Station
Description: Soldering iron |
Manufacturer: Xytronic |
About
- This tool is used to melt solder with its soldering iron or hot air station. This multi function rework station has a max heat output of 900W and can be used for hot air, soldering, and desoldering.
- Safety Glasses, long pants, and closed-toed shoes must be worn in the workshop.
Safety Concerns
This tool generates heat! Do not set directly on bench, do not leave tool operating without supervision.
Operating Procedures
- Secure the workpiece using the soldering hands.
- Heat the joint/wire to be soldered.
- Apply solder to the joint/wire using the soldering iron. Apply heat until the temperature of the iron equilibrates.
- Remove the iron from the joint. Use the desoldering braid located in the soldering supply bin if desoldering is needed.
Detailed Specifications
Normal Operation: 300-360 C
Temperature Range: 150-480 C
Reference Documentation
xytornix_soldering_station.1673304625.txt.gz · Last modified: 2023/01/09 22:50 by bassari