vaccum_chamber_sop
This is an old revision of the document!
Table of Contents
Ozone Cleaner Training SOP
07/17/25 Goose
Location
The ozone cleaner is located inside the fume hood closest to the Objet printer in the Microfluidics Lab in Elings Hall 3430.
Operating Procedures
- Make sure pump is connected to correct vacuum chamber. One chamber is for PDMS only.
- Place sample in chamber
- Set valve to VACUUM
- Turn timer to desired time
- Wait
- After time has elapsed set valve to OPEN
- Wait for chamber pressure to equalize
- Remove sample
vaccum_chamber_sop.1752788594.txt.gz · Last modified: 2025/07/17 21:43 by gzhang