vaccum_chamber_sop
Table of Contents
Vacuum Chamber Training SOP
07/17/25 Goose
Location
The vacuum chamber is located in the microfluidics wing next to the spin coater in Elings Hall 3430.
Operating Procedures
- Make sure pump is connected to correct vacuum chamber. One chamber is for PDMS only.
- Place sample in chamber
- Set valve to VACUUM
- Turn timer to desired time
- Wait
- After time has elapsed set valve to OPEN
- Wait for chamber pressure to equalize
- Remove sample
vaccum_chamber_sop.txt · Last modified: 2025/07/17 21:52 by gzhang