The Haas Super Mini Mill is a CNC milling machine. Parts can be modeled in SOLIDWORKS and then toolpaths are programmed through an HSM add-in that generates G-code for the machine to read. The Haas can read G-code and .EGC files.

406 x 305 x 254 mm, 40 taper, 15 hp vector drive, 10,000 rpm, 30.5 m/min rapids, high-speed 10-station automatic tool changer, coolant pump, power-failure detection module, 1 GB program memory, 15″ colour LCD monitor, USB port, memory lock keyswitch, and rigid tapping. Three-phase power only.

• X-axis: 16“
• Y-axis: 12”
• Z-axis: 10“
• Spindle nose to table: 14” max 4“ min
• Table length: 36”
• Work area length: 28.75“
• Width: 12”
• T-slot width: 12“
• T-slot center distance: 4.33”
• # T-slots: 3
• Max load on table: 500 lb
• Max spindle rating: 15 hp
• Max speed: 10,000 rpm
• Max torque: 17 ft-lb @ 4600 rpm
• Taper: 40
• Rapids: 1200 in/min
• Max cutting: 833 in/min
• Max thrust: 2000 lb
• Max tool diameter: 3.5“

Insert Text Here!

Insert Text Here!

Pre Install Manual

Programming Manual

Probe Training Manual

Operators Manual

Programming Workbook

Haas Super Mini Mill Training SOP

RS232 file transfer documentation

Haas / HSMWorks Intro Text

Haas mill setup checklist