exposure_system
This is an old revision of the document!
Table of Contents
36W 365 nm UV Exposure System
| 36W 365 nm UV Exposure System |
|---|
 |
| Tool Type: UV Exposure Chamber |
| Location: Elings 3430 |
| Supervisor | Tool Lead |
| Brian Dincau | Brian Dincau |
| (805) 724-0426 | (805) 724-0426 |
| workshop-manager@cnsi.ucsb.edu | workshop-manager@cnsi.ucsb.edu |
| Description: Enclosed chamber with UV Bulb and Turntable |
| Manufacturer: KAIS |
About
Small UV enclosure, primarily for curing of resins and resists.
Detailed Specifications
Safety Concerns
Ultraviolet Radiation Hazard - UV bulb should only be on when door is closed.
Heat Hazard - UV Bulb can get hot with long use, care to avoid touching it when removing a sample.
Operating Procedures
1. Open the chamber door.
2. Position substrate.
3. Close chamber door.
4. Set timer for exposure.
Reference Documentation
Training Documentation
n/a
exposure_system.1661292073.txt.gz · Last modified: 2022/08/23 22:01 by bdincau