This is an old revision of the document!
Table of Contents
Crystalmark Etching Tool
| Crystalmark |
|---|
| picture_of_crystalmark |
| Tool Type: Etching Tool |
| Location: Microfluidics Lab |
| Description: [SOMETHING] |
| Manufacturer: [SOMETHING] |
About
The CrystalMark Etcher is located in the Microfluidics Lab on the middle table by the Haas CNC in 3430. It is attached to the Sherline CNC Diamond Drill.
It uses air pressure and aluminum oxide abrasive to cut or etch patterns in materials such as glass or silicon. The kerf of the cuts are 700 microns.
Patterns and pre-programmed holes can be uploaded via .dxf files to a program called insert program here, and holes can also be added manually.
Safety Concerns
Inhaling large amounts of aluminum oxide can be hazardous. It is recommended to wear a mask and eye protection when using the CrystalMark.
Training Documentation
Detailed Specifications
Build Volume: 14.5 x 14.5 x 17.5 cm (L x W x H)
X,Y Accuracy: ~150 ish microns
Layer Thickness: 25-300 microns
Printable Materials: Standard resin (clear or available colors), Durable resin, Flexible resin