exposure_system
This is an old revision of the document!
Table of Contents
36W 365 nm UV Exposure System
| UV Exposure System |
|---|
 |
| Tool Type: UV exposure chamber |
| Location: Microfluidics Lab |
| Description: Enclosed chamber with UV bulb and turntable |
| Manufacturer: KAIS |
About
Small UV enclosure, primarily for curing of resins and resists.
Safety Concerns
Ultraviolet Radiation Hazard - UV bulb should only be on when door is closed.
Heat Hazard - UV Bulb can get hot with long use, care to avoid touching it when removing a sample.
Operating Procedures
1. Open the chamber door.
2. Position substrate.
3. Close chamber door.
4. Set timer for exposure.
Detailed Specifications
Reference Documentation
exposure_system.1672950586.txt.gz · Last modified: 2023/01/05 20:29 by haley