Differences

This shows you the differences between two versions of the page.

--- stratasys_f270 [2020/11/04 01:11] – [Detailed Specifications] dave
+++ stratasys_f270 [2024/09/26 19:35] (current) – epace
@@ Line 1: / Line 1: @@
 ====== Stratsys F270 FDM 3D Printer ======
-{{:tools:stratasysf270:stratasysf270.jpeg?200|}}
-^                Stratsys F270 FDM 3D Printer                           ^
-|                                                                       |
-| **Tool Type:**                  "F3D printer"                           |
-| **Location:**                   "Innovations Workshop"                           |
+^                F270                          ^
+|                      {{:tools:stratasysf270:stratasysf270.jpeg?200|}}                 |
+| **Tool Type:**                  3D printer                           |
+| **Location:**                   Elings 3430                           |
-|  **Supervisor**        |  **Tool Lead**  |
-|  David Bothman         |  "Andrew Furst"  |
-|  (805) 893-4125        |  (801) 928-8869  |
-|  bothman@cnsi.ucsb.edu  |  "andrewfurst@ucsb.edu"  |
-| **Description:**                "FDM duel extrusion 3D printer"                           |
+| **Description:**                Enclosed duel extrusion FDM 3D printer                           |
-| **Manufacturer:**               "Stratasys"                           |
+| **Manufacturer:**               Stratasys                           |
 ----
@@ Line 20: / Line 15: @@
 ===== About =====
-The F270 is a fast and precise filament fed fusion deposition printer. Typically set up with ABS and a soluble filament that is dissolved in a heated caustic bath.
+The F270 is a fast and precise filament fed fusion deposition printer. It is typically set up with ABS and a soluble filament that is dissolved in a heated caustic bath.
 ----
-===== Training Documentation =====
-[[F270_sop|FDM Printer SOP]]
+===== Safety Concerns =====
+  * The print heads can be very hot - do not touch them with bare hands unless positive they are cool.
+  * As with any automated machinery make sure that your body is clear of the moving parts to avoid injury.
+  * The support removal tank for the F270 is filled with heated caustic chemicals that dissolve the support material. An apron, gloves, and a face shield must be worn when inserting and removing parts or basket from tank.
 ----
-===== Detailed Specifications =====
-Build area: 308 x 254 x 308 mm \\
+===== Training Documentation =====
-Dual extrusion 3D printer (build and support material) \\
-capable of printing PLA, ABS, ASA, QSR \\
+[[ultimaker_3_sop|FDM Training SOP]]
-.254 mm min layer thickness \\
-tolerance of +/- .200 mm \\
-spool bay \\
 ----
-===== Safety Concerns =====
+===== Post-Processing =====
-  * The print heads can be very hot - do not touch them with bare hands unless positive they are cool.
+[[sca_naoh_bath|SCA 1200 HT NaOH parts bath]]
-  * As with any automated machinery make sure that your body is clear of the moving parts to avoid injury.
-  * The support removal tank for the F270 is filled with heated caustic chemicals that dissolve the support material. An apron, Gloves, and a face shield must be warn when inserting and removing parts or basket from tank.
 ----
-===== Operating Procedures =====
+===== Detailed Specifications =====
-  - On the F270 printers computer, launch GrabCad Print
+Build area: 308 x 254 x 308 mm \\
-  - Select File -> New Project -> Add Models -> Import desired models
+Dual extrusion 3D printer (build and support material) \\
-  - Move models around on virtual build tray so that models on a used build tray do not overlap any previously printed spots
+capable of printing PLA, ABS, ASA, QSR \\
-  - the purge block and printed model should be placed close together to minimize print time
+.254 mm min layer thickness \\
-  - Select "Print Settings" from the menu on the right hand side
+XY tolerance of +/- .200 mm \\
-  - From menu, select desired slice height, and verify that the first layer material is set to support.
+spool bay \\
-  - Open and place build tray into F270, making sure that the tray is locked in place by pulling up on the front locking arm until arm is PARALLEL to build tray.
-  - Select print, and send the job to the F270 3D printer
-  - on the F270 touch screen, select your job, and then select print.
------
+----
 ===== Reference Documentation =====