Differences

This shows you the differences between two versions of the page.

--- xytornix_soldering_station [2023/01/31 00:24] – [Safety Concerns] bdincau
+++ xytornix_soldering_station [2023/01/31 00:25] (current) – [Operating Procedures] bdincau
@@ Line 20: / Line 20: @@
 ===== Safety Concerns =====
-**High Heat Hazard** - This tool generates heat! Do not set directly on bench, do not leave tool operating without supervision. Do not touch the solder iron tip or heat gun tip. //
+**High Heat Hazard** - This tool generates heat! Do not set directly on bench, do not leave tool operating without supervision. Do not touch the solder iron tip or heat gun tip. \\
-**Noxious Fumes** - Solder fumes contain vaporized flux (rosin) and may contain trace heavy metals. These fumes can cause discomfort for some, and long-term exposure can manifest as adverse health effects, such as acute asthma. It is recommended to use one of the bench-top fume exhausts while soldering. //
+**Noxious Fumes** - Solder fumes contain vaporized flux (rosin) and may contain trace heavy metals. These fumes can cause discomfort for some, and long-term exposure can manifest as adverse health effects, such as acute asthma. It is recommended to use one of the bench-top fume exhausts while soldering. \\
 ----
@@ Line 30: / Line 30: @@
   * Apply solder to the joint/wire using the soldering iron. Apply heat until the temperature of the iron equilibrates.
   * Remove the iron from the joint. Use the desoldering braid located in the soldering supply bin if desoldering is needed.
+  * If you are new to soldering and could use some tips, please contact the workshop staff or workshop manager, who would be happy to assist you.
 ===== Detailed Specifications =====