Differences

This shows you the differences between two versions of the page.

--- xytornix_soldering_station [2023/01/09 22:43] – bassari
+++ xytornix_soldering_station [2023/01/31 00:25] (current) – [Operating Procedures] bdincau
@@ Line 14: / Line 14: @@
 ===== About =====
-This tool is used to melt solder with its soldering iron or hot air station. This multi function rework station has a max heat output of 900W and can be used for hot air, soldering, and desoldering.
+  * This tool is used to melt solder with its soldering iron or hot air station. This multi function rework station has a max heat output of 900W and can be used for hot air, soldering, and desoldering.
+  * Safety Glasses, long pants, and closed-toed shoes must be worn in the workshop.
 ----
 ===== Safety Concerns =====
-This tool generates heat! Do not set directly on bench, do not leave tool operating without supervision.
+**High Heat Hazard** - This tool generates heat! Do not set directly on bench, do not leave tool operating without supervision. Do not touch the solder iron tip or heat gun tip. \\
+**Noxious Fumes** - Solder fumes contain vaporized flux (rosin) and may contain trace heavy metals. These fumes can cause discomfort for some, and long-term exposure can manifest as adverse health effects, such as acute asthma. It is recommended to use one of the bench-top fume exhausts while soldering. \\
 ----
@@ Line 26: / Line 30: @@
   * Apply solder to the joint/wire using the soldering iron. Apply heat until the temperature of the iron equilibrates.
   * Remove the iron from the joint. Use the desoldering braid located in the soldering supply bin if desoldering is needed.
+  * If you are new to soldering and could use some tips, please contact the workshop staff or workshop manager, who would be happy to assist you.
 ===== Detailed Specifications =====
+Normal Operation: 300-360 C \\
+Temperature Range: 150-480 C
 -----