Microfluidics Lab and Innovation Workshop Wiki

User Tools

Site Tools

Trace:
ultimaker_3_sop

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
ultimaker_3_sop [2022/08/26 23:59] – haleyultimaker_3_sop [2022/08/27 00:18] (current) – haley
Line 1: Line 1:
-======Ultimaker Training SOP======+====== FDM Training SOP======
 Last edited: Haley Holcomb (08/26/22) \\ Last edited: Haley Holcomb (08/26/22) \\
 Tool Lead: Jason Wei & Andrew Furst \\ Tool Lead: Jason Wei & Andrew Furst \\
Line 126: Line 126:
  
 ====Training Checklist:==== ====Training Checklist:====
-  *Components Overview: thermoplastics, extruder, print head, print cores, build plate +  *Components Overview: thermoplastics, extruder, print head, print cores, build tray, material wells 
-  *Safety: hot printheads, support removal tanks+  *Safety: NaOH bath
   *Job Setup   *Job Setup
-    *At the computer: appropriate software for each printer, print parameters, support materials, record in FBS +    *At the computer: GrabCAD, print parameters, record in FBS 
-    *At the printer: clean build tray +    *At the printer: build tray 
   *Part Removal Cleaning   *Part Removal Cleaning
     *Tray removal, Sodium hydroxide solution cleaning process      *Tray removal, Sodium hydroxide solution cleaning process 
   *Rates   *Rates
-    *PLA, ABS, Support, hourly charge+    *ABS, Support, hourly charge
  
 ====Overview:==== ====Overview:====
-  * This training provides an introduction to using and operating the FDM 3D printers including:+  * This training provides an introduction to using and operating the Stratasys F270:
     * File Types     * File Types
     * Software     * Software
Line 143: Line 143:
     * Printer Use     * Printer Use
     * Post processing     * Post processing
-    * Printer Maintenance +  * Prints with ABS
-      * Changing Print Heads +
-      * Changing Fulfillment Type +
-      * Cleaning +
-  * Set up to print with with ABS by default, Other materials are available upon request.+
   * Work by extruding thermoplastic filament onto build platform-Build the part layer by layer.   * Work by extruding thermoplastic filament onto build platform-Build the part layer by layer.
   * Remember to enter job information into the 3D print job log!   * Remember to enter job information into the 3D print job log!
  
 ====Safety==== ====Safety====
-  * The print heads can be very hot - do not touch them with bare hands unless positive they are cool. 
   * As with any automated machinery make sure that your body is clear of the moving parts to avoid injury.   * As with any automated machinery make sure that your body is clear of the moving parts to avoid injury.
   * The support removal tank is filled with heated caustic chemicals that dissolve the support material. An apron, Gloves, and a face shield must be worn when inserting and removing parts or basket from tank.   * The support removal tank is filled with heated caustic chemicals that dissolve the support material. An apron, Gloves, and a face shield must be worn when inserting and removing parts or basket from tank.
Line 204: Line 199:
  
 ====Rates==== ====Rates====
 +F270: 
  
 {| {|
Line 216: Line 212:
 |} |}
  
-Hourly charge: $1/hr to pay for head replacement+F270 hourly charge: $1/hr to pay for head replacement 
 + 
 +Ultimaker: ABS: .12/gram
  
 ----- -----
ultimaker_3_sop.1661558380.txt.gz · Last modified: 2022/08/26 23:59 by haley