Differences

This shows you the differences between two versions of the page.

--- formwash_cleaner [2023/01/06 00:37] – [Form Wash Cleaner] haley
+++ formwash_cleaner [2023/07/12 17:06] (current) – rylin
@@ Line 1: / Line 1: @@
-====== Form Wash Cleaner======
+====== FormWash Cleaner======
-^       Form Wash Cleaner        ^
+^       FormWash        ^
 |            {{:tools:formwashcleaner:formwashcleaner.png?200|}}        |
 | **Tool Type:**                  Post-processing                          |
@@ Line 7: / Line 7: @@
-| **Description:**                Formlabs alcohol cleaning station                          |
+| **Description:**                FormLabs alcohol cleaning station                          |
-| **Manufacturer:**               Formlabs                           |
+| **Manufacturer:**               FormLabs                           |
+Last updated 1/5/23 Haley
 ----
 ===== About =====
-The Form Wash is a post processor for the Form 2 resin 3D printers. Using an alcohol bath, build trays and/or parts can be loaded into the Form Wash where all uncured resin from the surface of the prints is removed.
+The FormWash is a post processor for the Form 2 resin 3D printers. Using an alcohol bath, build trays and/or parts can be loaded into the FormWash where all uncured resin from the surface of the prints is removed.
 ----
@@ Line 20: / Line 21: @@
 ===== Safety Concerns =====
-Form Wash contains large amounts of IPA, a flammable solvent. Form wash should only be operated within a fume hood away from any possible sources of heat of sparks. Filling the Form wash should only be done by a Workshop Wizard within the fume hood.
+FormWash contains large amounts of IPA, a flammable solvent. Keep away from any possible sources of heat or sparks. Filling the FormWash should only be done by a Workshop Wizard within the fume hood.
 ----
@@ Line 29: / Line 30: @@
   - Load the build platform or optionally remove prints from build platform and load into Form Wash basket.
   - Using the dial select the desired amount of time, click "START"
-  - When the wash is complete, Remove parts and/or build tray, and select "SLEEP". \\
+  - When the wash is complete, Remove parts and/or build tray, and select "SLEEP". Cover the Form Wash with the plastic bag to prevent alcohol evaporation.\\
 NOTE: When the Form Wash in complete, the lid will automatically open, allowing alcohol to evaporate. Before leaving, make sure Form Wash is shut. DO NOT LEAVE AFTER STARTING FORM WASH!!!
 ----