Differences

This shows you the differences between two versions of the page.

--- xytornix_soldering_station [2023/01/06 00:26] – [Xytronic LF-853D soldering station] haley
+++ xytornix_soldering_station [2024/09/26 19:53] (current) – epace
@@ Line 1: / Line 1: @@
-====== Xytronic LF-853D soldering station ======
+====== Xytronic LF-853D Soldering Station ======
 ^                                    Soldering Station         ^
 |           {{:tools:xytronix_lf-853d:xytronix_lf-853d.jpg?200|}}        |
-| **Tool Type:**                  TEXT                           |
+| **Tool Type:**                  Electronics/joining tool                          |
-| **Location:**                   Innovation Workshop                           |
+| **Location:**                   Elings 3430                           |
@@ Line 14: / Line 14: @@
 ===== About =====
+  * This tool is used to melt solder with its soldering iron or hot air station. This multi function rework station has a max heat output of 900W and can be used for hot air, soldering, and desoldering.
-This tool is used to melt solder with its soldering iron or hot air station. This multi function rework station has a max heat output of 900W and can be used for hot air, soldering, and desoldering.
+  * Safety Glasses, long pants, and closed-toed shoes must be worn in the workshop.
-----
-===== Detailed Specifications =====
-Insert Text Here!
 ----
 ===== Safety Concerns =====
+**High Heat Hazard** - This tool generates heat! Do not set directly on bench, do not leave tool operating without supervision. Do not touch the solder iron tip or heat gun tip. \\
-This tool generates heat! Do not set directly on bench, do not leave tool operating without supervision.
+**Noxious Fumes** - Solder fumes contain vaporized flux (rosin) and may contain trace heavy metals. These fumes can cause discomfort for some, and long-term exposure can manifest as adverse health effects, such as acute asthma. It is recommended to use one of the bench-top fume exhausts while soldering. \\
 ----
 ===== Operating Procedures =====
+  * Secure the workpiece using the soldering hands.
+  * Heat the joint/wire to be soldered.
+  * Apply solder to the joint/wire using the soldering iron. Apply heat until the temperature of the iron equilibrates.
+  * Remove the iron from the joint. Use the desoldering braid located in the soldering supply bin if desoldering is needed.
+  * If you are new to soldering and could use some tips, please contact the workshop staff or workshop manager, who would be happy to assist you.
+===== Detailed Specifications =====
+Normal Operation: 300-360 C \\
+Temperature Range: 150-480 C
-"Type text here"
+-----
-----
 ===== Reference Documentation =====
 {{:tools:xytronix_lf-853d:lf-853d_manual.pdf|}}
@@ Line 42: / Line 46: @@
 [[https://www.youtube.com/watch?v=Qps9woUGkvI]]
-----
-===== Training Documentation =====
-Insert Text Here!
+-----
-----