Differences

This shows you the differences between two versions of the page.

--- ultimaker3_extended [2023/05/31 21:52] – [Safety Concerns] haley
+++ ultimaker3_extended [2024/09/26 19:36] (current) – epace
@@ Line 1: / Line 1: @@
-====== Ultimaker 3 Extended/S5 Dual FDM 3D Printer ======
+====== Ultimaker S5 Dual FDM 3D Printer ======
+Last updated: 5/31/23 Haley
+^            Ultimaker S5                  ^
-^            Ultimaker 3/S5                  ^
+|                    {{:tools:ultimaker3:ultimaker3.jpg?150|}}          |
-|                    {{:tools:ultimaker3:ultimaker3.jpg?200|}}          |
 | **Tool Type:**                  3D printer                           |
-| **Location:**                   Innovation Workshop                           |
+| **Location:**                   Elings 3430                           |
@@ Line 15: / Line 15: @@
 ===== About =====
-The Ultimaker 3 extended & Ultimaker S5 are filament fed fusion deposition 3D printers capable of simultaneously printing two different plastics at once. Typically the printer is set up with ABS as a build material, and PVA as a solvable support material.
+The Ultimaker S5 is a filament fed fusion deposition 3D printer capable of simultaneously printing two different plastics at once. Typically the printer is set up with ABS as a build material, and PVA as a solvable support material.
 ----
@@ Line 33: / Line 33: @@
 ===== Detailed Specifications =====
-Ultimaker 3 Extended: \\
-  *Build Volume: 215 x 215 x 300 mm \\
-  *Filament diameter: 2.85 mm\\
-  *layer resolution: 60 to 600 microns depending on print head (see Specifications documentation  page 11)\\
-  *XYZ accuracy: 12.5, 12.5, 2.5 microns \\
-  *Build plate temperature: 20-100 °C\\
-  *Nozzle temperature: up to 210 °C\\
 Ultimaker S5: \\
-  * Build Volume: 330 x 240 x 300 mm
+  * Build Volume: 330x240x300 mm
   * Filament diameter: 2.85 mm\\
-  * Layer Resolution: 200 - 20 micron with 0.4mm nozzle (stock), 150 - 60 micron with 0.25 mm nozzle, 300 - 20 micron with 0.6 mm nozzle, and 600 - 20 micron with 0.8mm nozzle.
+  * XYZ resolution: 6.9, 6.9, 2.5 micron
+  * Build plate temperature: 20-140 °C
+  * Nozzle Temperature: 180-280 °C
 -----
@@ Line 58: / Line 52: @@
 Bed: 100 C
-{{:tools:ultimaker3:quick_start_guide_ultimaker_3_v3.2.pdf|}}\\
+{{ :a700000006509368.pdf |ultimaker s5 specs}}\\
-{{:tools:ultimaker3:ultimaker_3_extended_specifications.pdf|}}\\
+{{:tools:ultimaker3:quick_start_guide_ultimaker_3_v3.2.pdf|Quick start guide}}\\
 {{:tools:ultimaker3:um180129_ultimaker_3_manual_rb_v12_english.pdf|}}\\
 [[https://support.ultimaker.com/hc/en-us/articles/360012007119]]\\