Differences

This shows you the differences between two versions of the page.

--- neytech_qex_furnace [2023/01/31 00:07] – bdincau
+++ neytech_qex_furnace [2023/01/31 00:13] (current) – [Reference Documentation] bdincau
@@ Line 20: / Line 20: @@
 ===== Safety Concerns =====
-**High Heat Hazard** - Never operate furnace near combustibles. Always wear thermally insulated gloves when transferring samples out of the furnace. //
+**High Heat Hazard** - Never operate furnace near combustibles. Always wear thermally insulated gloves when transferring samples out of the furnace. \\
-**Pinching Hazard** - Be careful when closing the top assembly, known as the muffle. It's possible to pinch your fingers/hands when closing. It is also possible to damage you sample if any part of your sample hangs off of the interior platform. //
+**Pinching Hazard** - Be careful when closing the top assembly, known as the muffle. It's possible to pinch your fingers/hands when closing. It is also possible to damage you sample if any part of your sample hangs off of the interior platform. \\
 ----
 ===== Operating Procedures =====
-See attached operating manual for detailed operation. //
+See attached operating manual for detailed operation. \\
-General Operation //
+General Operation \\
-) Set up the furnace on an appropriate counter top. Make any desired vacuum or nitrogen connections.//
+) Set up the furnace on an appropriate counter top. Make any desired vacuum or nitrogen connections.\\
-) Plug the furnace in and power on.//
+) Plug the furnace in and power on.\\
-) Set up your desired program.//
+) Set up your desired program.\\
-) Open the muffle by pressing the double up arrow.//
+) Open the muffle by pressing the double up arrow.\\
-) Load your sample onto the platform, ensuring that none of you sample hangs over the edge.//
+) Load your sample onto the platform, ensuring that none of you sample hangs over the edge.\\
-) Close the muffle and run your program.//
+) Close the muffle and run your program.\\
-) When finished, move the muffle up, remove your sample, and power down the furnace.//
+) When finished, move the muffle up, remove your sample, and power down the furnace.\\
 ----
 ===== Detailed Specifications =====
-See attached manual for complete specifications//
+See attached manual for complete specifications\\
-//
+\\
-Chamber Platform Diameter: 4 in (10 cm)
+Chamber Platform Diameter: 4 in (10 cm)\\
-Chamber Height: 2.5 in (6.3 cm)
+Chamber Height: 2.5 in (6.3 cm)\\
-Max Temp: 1200 C
+Max Temp: 1200 C\\
 -----
@@ Line 51: / Line 51: @@
 ===== Reference Documentation =====
+{{:Tools:neytech_man.pdf | Operation Manual}}
 -----