Differences

This shows you the differences between two versions of the page.

--- h2d_sop [2025/09/25 22:01] – colin
+++ h2d_sop [2025/09/26 19:30] (current) – colin
@@ Line 20: / Line 20: @@
   - Launch Bambu Studio (green Bambu Lab logo) or OrcaSlicer
   - Start a fresh plate: select File -> New Project
+  - Ensure nozzle size and build tray is selected correctly (see Bambu Studio Software Information)
   - Import your STL file onto the software: select File -> Import -> Import 3MF/STL/... -> choose your STL file
   - Set up scale, orientation, arrangement, and supports as needed
@@ Line 28: / Line 29: @@
   - Check AMS to see if there is enough filament for your print. If not enough filament, replace the spool
   - Once build tray/printer is all set up, click "Print Plate" on Bambu Studio
-      - Select "IW-H2D" for the printer
+      - Select "IW_H2D-1" for the printer
       - Make sure only "Bed Leveling" and "Enable AMS" is selected and start print
+====Dual Material Printing====
+  - Within the H2D display, navigate to Filament Icon->Left Spool->Unload Filament
+  - Allow H2D to unload filament within Creality filament storage.
+  - Load in desired Filament
+  - Within Bambu Slicer, follow this [[https://wiki.bambulab.com/en/software/bambu-studio/multi-color-printing|tutorial]] to slice in dual materials
 ====Post Processing====