Differences

This shows you the differences between two versions of the page.

--- h2d_sop [2025/09/25 21:19] – colin
+++ h2d_sop [2025/10/01 16:47] (current) – colin
@@ Line 1: / Line 1: @@
-====== Bambu Lab FDM Training SOP======
+====== Bambu Lab H2D FDM Training SOP======
 ====Training Checklist:====
@@ Line 5: / Line 5: @@
   *Safety: hot printheads & bed, moving components
   *Job Setup:
-    *At the computer: CAD -> export .stl -> Bambu Studio OR OrcaSlicer (set up print parameters and support materials) -> select "Innovation Workshop H2D" printer -> start print (make sure "Enable AMS" and "Bed Leveling" are selected)-> record in FBS
+    *At the computer: CAD -> export .stl -> Bambu Studio OR OrcaSlicer (set up print parameters and support materials) -> select "IW_H2D-1" printer -> start print (make sure "Enable AMS" and "Bed Leveling" are selected)-> record in FBS
     *At the printer: remove leftover supports/calibration lines -> clean and dry build tray
@@ Line 20: / Line 20: @@
   - Launch Bambu Studio (green Bambu Lab logo) or OrcaSlicer
   - Start a fresh plate: select File -> New Project
+  - Ensure nozzle size and build tray is selected correctly (see Bambu Studio Software Information)
   - Import your STL file onto the software: select File -> Import -> Import 3MF/STL/... -> choose your STL file
   - Set up scale, orientation, arrangement, and supports as needed
@@ Line 28: / Line 29: @@
   - Check AMS to see if there is enough filament for your print. If not enough filament, replace the spool
   - Once build tray/printer is all set up, click "Print Plate" on Bambu Studio
-      - Select "IW-H2D" for the printer
+      - Select "IW_H2D-1" for the printer
       - Make sure only "Bed Leveling" and "Enable AMS" is selected and start print
+====Dual Material Printing====
+  - Within Bambu Slicer, follow these tutorials to slice in dual materials:
+    * [[https://wiki.bambulab.com/en/software/bambu-studio/multi-color-printing|Bambu Labs Tutorial]]
+    * [[https://www.youtube.com/watch?v=xwuf-kZlpH8&t=163s|Youtube Tutorial]]
+  - To swap filament navigate to Filament Icon->Left Spool->Unload within the H2D display,
+  - Allow H2D to unload filament, follow instructions accordingly
+  - Once unloaded, remove the spool from the Creality filament dryer
+  - Respool the filament neatly and store in proper bin
+  - Place desired filament spool into the Creality Filament dryer
+  - Insert the filament through the bowden tube until it can't be inserted further
+  - Within the H2D display, navigate to Filament Icon -> Left Spool -> Load, follow instructions accordingly
 ====Post Processing====
@@ Line 42: / Line 57: @@
 ====Bambu Studio Software Information====
-{{:bambuprintersettings.jpg?600}}
+{{:h2d_printer_preset.png?300|}}\\
+{{:h2d_nozzle_diameter.png?200|}}
+{{:h2d_buildplate_preset.png?200|}}
   - Select the correct nozzle that you are using. (Typically, the 0.4 nozzle is the one in the printer)