Innovation Workshop Wiki

User Tools

Site Tools

Trace: • h2d_sop • bambulabh2d
h2d_sop

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
h2d_sop [2025/09/25 21:17] – colinh2d_sop [2025/09/26 19:30] (current) – colin
Line 1: Line 1:
-====== Bambu Lab FDM Training SOP======+====== Bambu Lab H2D FDM Training SOP======
  
 ====Training Checklist:==== ====Training Checklist:====
Line 5: Line 5:
   *Safety: hot printheads & bed, moving components   *Safety: hot printheads & bed, moving components
   *Job Setup:       *Job Setup:    
-    *At the computer: CAD -> export .stl -> Bambu Studio OR OrcaSlicer (set up print parameters and support materials) -> select "Innovation Workshop H2D" printer -> start print (make sure "Enable AMS" and "Bed Leveling" are selected)-> record in FBS+    *At the computer: CAD -> export .stl -> Bambu Studio OR OrcaSlicer (set up print parameters and support materials) -> select "IW_H2D-1" printer -> start print (make sure "Enable AMS" and "Bed Leveling" are selected)-> record in FBS
     *At the printer: remove leftover supports/calibration lines -> clean and dry build tray     *At the printer: remove leftover supports/calibration lines -> clean and dry build tray
  
Line 20: Line 20:
   - Launch Bambu Studio (green Bambu Lab logo) or OrcaSlicer   - Launch Bambu Studio (green Bambu Lab logo) or OrcaSlicer
   - Start a fresh plate: select File -> New Project   - Start a fresh plate: select File -> New Project
 +  - Ensure nozzle size and build tray is selected correctly (see Bambu Studio Software Information)
   - Import your STL file onto the software: select File -> Import -> Import 3MF/STL/... -> choose your STL file   - Import your STL file onto the software: select File -> Import -> Import 3MF/STL/... -> choose your STL file
   - Set up scale, orientation, arrangement, and supports as needed   - Set up scale, orientation, arrangement, and supports as needed
Line 28: Line 29:
   - Check AMS to see if there is enough filament for your print. If not enough filament, replace the spool   - Check AMS to see if there is enough filament for your print. If not enough filament, replace the spool
   - Once build tray/printer is all set up, click "Print Plate" on Bambu Studio   - Once build tray/printer is all set up, click "Print Plate" on Bambu Studio
-      - Select "Innovation Workshop H2D" for the printer+      - Select "IW_H2D-1" for the printer
       - Make sure only "Bed Leveling" and "Enable AMS" is selected and start print       - Make sure only "Bed Leveling" and "Enable AMS" is selected and start print
 +
 +====Dual Material Printing====
 +  - Within the H2D display, navigate to Filament Icon->Left Spool->Unload Filament
 +  - Allow H2D to unload filament within Creality filament storage.
 +  - Load in desired Filament
 +  - Within Bambu Slicer, follow this [[https://wiki.bambulab.com/en/software/bambu-studio/multi-color-printing|tutorial]] to slice in dual materials 
 + 
 +
  
 ====Post Processing==== ====Post Processing====
h2d_sop.1758835030.txt.gz · Last modified: 2025/09/25 21:17 by colin