Differences

This shows you the differences between two versions of the page.

--- bambulab [2024/08/12 17:21] – [Bambu Lab X1-Carbon 3D Printer] epace
+++ bambulab [2024/08/19 20:58] (current) – [Detailed Specifications] kho
@@ Line 14: / Line 14: @@
 ======About======
-The Bambu X1C is located in Elings 2448 next to the Ultimaker. It is an FDM printer which extrudes melted filament onto a textured build plate. Currently, it uses ABS, PLA, PETG, and TPU; all in a very limited variety of colors. It's one of our fastest printers while still maintaining a high quality.
+The Bambu X1C is located in Elings 3430 next to the Ultimaker. It is an FDM printer which extrudes melted filament onto a textured build plate. Currently, it uses ABS, PLA, PETG, and TPU; all in a very limited variety of colors. It's one of our fastest printers while still maintaining a high quality.
+------
 ======Detailed Specifications======
 Nozzle tip sizes: 0.2 mm nozzle, 0.4 mm nozzle, 0.6 mm nozzle \\
-Max print dimensions: 256 mm x 256 mm x 256 mm \\
+Build volume: 256 mm x 256 mm x 256 mm \\
+X,Y accuracy: ~200 microns
+------
+======Training Documents======
+[[x1carbon_sop|X1-Carbon SOP]]
+------