Differences

This shows you the differences between two versions of the page.

--- access_and_training [2025/08/05 22:52] – bdincau
+++ access_and_training [2025/08/11 17:19] (current) – bdincau
@@ Line 3: / Line 3: @@
 The CNSI's Innovation Workshop is open to all researchers at UCSB. We accommodate as many student project teams (Capstone, New Ventures, Bren EcoE, ....) as possible. The labs are also available to off campus users (contact Brian Dincau, bdincau@ucsb.edu).
-=====New User Setup=====
+=====Complete the following steps in the order presented to obtain lab access=====
-Before you can use ANY CNSI shared facilities, you must fill out the initial Facility Access Request on the [[https://www.cnsi.ucsb.edu/facilities/innovation-workshop | official Innovation Workshop website]].
+====(1) Facility Access Request====
+Before you can use ANY CNSI shared facilities, you must fill out the initial Facility Access Request on the [[https://www.cnsi.ucsb.edu/facilities/innovation-workshop | official CNSI website]].
 For all academic users, you must know your CCOA accounting string in order to complete this form. Training cannot be completed until after your CCOA accounting string is verified.
-====New User Orientation & Tool Training====
+====(2) New User Orientation====
-Completion of the new user orientation  is required before obtaining card-key access to the CNSI Workshops. This is followed by training on the tools that you would like to use.
+Completion of the new user orientation  is required before obtaining card-key access to the CNSI Workshops.
 To request an orientation or tool training, please [[https://forms.gle/E88bZPm623Cf8Vd67 | complete this training request form]] AFTER you've submitted your Facility Access Request.
-====Required UC Lab Safety On-line Training Class====
+====(3) Required UC Lab Safety On-line Training Class====
-The University requires that everyone working in a laboratory complete an online class through the learning center, “UC Laboratory Safety Fundamentals Initial”. A refresher is required every three years. Your cardkey access request will not be approved until there is proof that you have completed the training.
+The University requires that everyone working in a laboratory complete an online class through the learning center, “UC Laboratory Safety Fundamentals Initial”. A refresher is required every year. Your cardkey access request will not be approved until there is proof that you have completed the training.
 Here are the instructions for signing up for the class:
@@ Line 27: / Line 29: @@
-====Card Key Access====
+====(4) Card Key Access====
-After training completion, card key access to the Workshop may be requested using the card key access form below. You can only access this form on the campus network or VPN.
+After safety training completion, card key access to the Workshop may be requested using the card key access form below. You can only access this form on the campus network or VPN.
 The Innovation Workshop is both **Room 3430** and **Room 2442**. Also remember to request access to the **exterior doors**. If you want access as fast as possible, please only request these rooms and save other room requests for a separate submission.
 Before filling out the card key access form, make sure you have:
-  - Filled out the new user form
+  -completed the (1) Facility Access Request
-  - Completed the new user orientation
+  -completed a (2) New User Orientation
-  - Emailed Dr. Brian Dincau proof of completion of the UC lab safety course
+  -submitted proof of (3) Laboratory Safety Training
+After doing so, you may use this form:
 [[http://access.cnsi.ucsb.edu/Forms/form.php|Card key access form (REQUIRED)]]