Differences

This shows you the differences between two versions of the page.

--- yamoto-convection [2022/05/23 17:13] – created petreikis
+++ yamoto-convection [2023/01/06 01:28] (current) – [Yamoto DKN400 Convection Oven] haley
@@ Line 1: / Line 1: @@
 ======Yamoto DKN400  Convection Oven======
-^                           Yamoto DKN400  Convection Oven                               ^
+^                           Yamoto Convection Oven                               ^
 |        {{:final_oven.jpg?200|}}           |
-| **Tool Type:**                  "Oven"                   |
+| **Tool Type:**                  Oven                   |
-| **Location:**                   "Room 3430"                   |
+| **Location:**                   Microfluidics Lab                   |
-|  **Supervisor**        |  **Tool Lead**  |
+| **Description:**                Convection oven                           |
-|  David Bothman         |  "WW Name"  |
+| **Manufacturer:**               Yamoto                           |
-|  (805) 893-4125        |  (###) ###-####  |
-|  bothman@cnsi.ucsb.edu  |  "WW Email"  |
-| **Description:**                "TEXT HERE"                           |
-| **Manufacturer:**               "TEXT HERE"                           |
+/5/23 Haley
 ----
 ===== About =====
+Mechanical convection ovens utilize a motorized fan to create a consistent distribution of flowing air that allows for quick and uniform heating.
 ----
-===== Detailed Specifications =====
-----
 ===== Safety Concerns =====
+  * High Voltage
+  * High Temperature
+  * No combustibles or hazardous materials
+  * Thermally insulating gloves must be worn when working with hot items. They can usually be found on the bench next to the ovens.
+  * No food may be placed in laboratory ovens.
+  * Never heat a sealed container.
+  * Do not operate the oven if it is damaged, or is not working properly. Please place a note on the oven to alert other users, and notify laboratory staff of the problem.
+  * **Double containment is required for heating containers of liquid to prevent leaked material from contaminating the oven. This is especially true when heating PDMS molds.
+**
 ----
-===== Reference Documentation =====
+===== Operating Procedures =====
+  - Enter the set point temperature (see instructions for the different controllers below)
+  - Place your items in the oven. Remember to place liquid materials on a baking sheet or other secondary container.
+  - Set the countdown timer for the length of your run. If the timer reads zero time remaining another user who needs to use the oven may remove your items.
+  - Remove your items from the oven and close the door.
+  - The oven is left powered on.
+__Changing the oven set point__
+  - Press FIXED TEMP
+  - Use the ↑↓ to adjust the temperature
+  - Press the SET/ENT button
+__Setting the countdown timers__
+  - Press 1
+  - Enter the run time (HMS buttons)
+  - Press 1 to start the countdown
+  - Press and hold 1 to reset
 ----
-===== Training Documentation =====
+===== Detailed Specifications =====
-[[Laboratory Oven SOP]]
+  * Temperature range: 5C-260C
+  * Ambient temperature: 23C
+  * Warming time: room temperature to 260C in approx. 60 minutes
+  * Cooling time: 260C to 50C in approx. 150 minutes
+  * Heater: 1.2kw SUS pipe heater
+  * Internal dimensions: 450mm x 400mm x 400mm
+  * Capacity: 2.5 cu. ft.
+  * 2 shelves
+-----
+===== Reference Documentation =====
+{{:tools:yamoto_oven:dkn400.pdf | DKN400 Operation Manual}}
+[[lab-oven-SOP|Laboratory Oven SOP]]
 ----