whatprintershouldiuse
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
whatprintershouldiuse [2023/07/18 21:41] – [Ultimaker] bdincau | whatprintershouldiuse [2023/08/02 18:38] (current) – rylin | ||
---|---|---|---|
Line 1: | Line 1: | ||
=====Which 3D Printer is Best for my part?===== | =====Which 3D Printer is Best for my part?===== | ||
- | Depending on the geometry of a part, its application, | + | Depending on the geometry of a part, its application, |
=====Ultimaker===== | =====Ultimaker===== | ||
- | The Ultimaker printers are FDM filament fed 3D printers. Each has two extruders set up with build and support material with a tip width of .25,.4,.6 and .8 mm available. Layer lines are visible with this printer with slice heights of 60-200 micron, and this printer can print variable infill from 10% to 100%. | + | The Ultimaker printers are FDM filament-fed 3D printers. Each has two extruders set up with build and support material with a tip width of .25,.4,.6 and .8 mm available. Layer lines are visible with this printer with slice heights of 60-200 micron, and this printer can print variable infill from 10% to 100%. |
Default material: ABS (orange) & PVA (dissolvable) | Default material: ABS (orange) & PVA (dissolvable) | ||
Line 12: | Line 12: | ||
* PLA | * PLA | ||
* PVA (dissolvable support) | * PVA (dissolvable support) | ||
- | * nylon | + | * Nylon |
* CPE | * CPE | ||
* Flexible | * Flexible | ||
Line 48: | Line 48: | ||
The Form 3 printer is a SLA resin printer capable of very high precision. Using UV light to cure the resin bath, layer lines are less pronounced with slice heights from 25-100 microns depending on the resin. | The Form 3 printer is a SLA resin printer capable of very high precision. Using UV light to cure the resin bath, layer lines are less pronounced with slice heights from 25-100 microns depending on the resin. | ||
- | Default material: | + | Default material: |
**Pros:** | **Pros:** | ||
Line 56: | Line 56: | ||
* Durable | * Durable | ||
* Tough | * Tough | ||
- | * Flexable | + | * Flexible |
* Black (and many more) | * Black (and many more) | ||
* Able to produce optically clear parts | * Able to produce optically clear parts |
whatprintershouldiuse.1689716483.txt.gz · Last modified: 2023/07/18 21:41 by bdincau