Differences

This shows you the differences between two versions of the page.

--- trotec_speedy [2023/05/31 20:55] – [Detailed Specifications] haley
+++ trotec_speedy [2023/10/10 18:50] (current) – [Detailed Specifications] bdincau
@@ Line 15: / Line 15: @@
 ===== About =====
-One of two laser cutters, the Trotec is located in the Innovations Workshop above its fume extractor. Both laser cutters utilize CorelDraw as a 2D sketch manager which is then imported into Trotec's specific cutting software. CorelDraw can be used to create the 2D sketch, however importing a DXF file or PDF into CorelDraw from Solidworks or other CAD packages is preferred due the CAD packages integrated features and functions.
+The Trotec Laser Cutter uses a 30-60W CO2 laser to cut and engrave various materials. It utilizes CorelDraw as a 2D sketch manager, which is then imported into Trotec's specific cutting software. CorelDraw can be used to create the 2D sketch, however importing a DXF file or PDF into CorelDraw from Solidworks or other CAD packages is preferred due the CAD packages integrated features and functions.
 ----
@@ Line 24: / Line 24: @@
   * Always wear safety glasses when using the machine.
   * Always work with the machine cover closed.
-  * NEVER leave the laser machine alone when running a job. If you do need to leave,
+  * NEVER leave the laser machine alone when running a job. If you do need to leave, make sure there is someone else nearby who is aware that it is on and cutting.
   * The machine door must be left open while you are away.
   * Do not store any flammable materials in the inside of the device or in the immediate vicinity of the device.
@@ Line 34: / Line 34: @@
   * Looking directly into the laser can cause retinal damage.
   * Confirm that the fume collection system is running whenever the laser is cutting or engraving.
+  * Whenever heat is a concern, please use the nitrogen air assist. This includes cutting features with high surface density, or cutting materials that like to melt, such as delrin.
 ----
@@ Line 45: / Line 46: @@
 ===== Detailed Specifications =====
-  * Unordered List ItemWorking area (W x D): 24 x 12 in
+  * Working area (W x D): 24 x 12 in
   * Max. height of workpiece : 5.2 in
   * Loading area (W x D): 27 in x 17 in
   * Overall dimensions (W x D x H): 40 x 31 x 40 in
-  * Max. processing speed: 110 ips
+  * Max. processing speed: 1.8 m/s
   * Max. acceleration: 1,969 ips²
   * Technology motion system: Brushless DC servo motors
   * Laser power CO2: 30 - 60W
-  * Laser power fiber: 20 - 30 W
   * Laser class:2
   * Weight: 150 kg
   * Power consumption: 1 ~ AC 110-230V 50/60Hz, 1.3 kW (60 watts)
 ----