Differences

This shows you the differences between two versions of the page.

--- estimating_the_cost_of_3d_prints [2022/09/19 18:35] – haley
+++ estimating_the_cost_of_3d_prints [2023/11/21 17:48] (current) – colin
@@ Line 1: / Line 1: @@
 Users can estimate the cost of 3D prints made in the CNSI workshops by calculating the volume of their part in cubic centimeters (cc) and then using these rules of thumb:
-  * FDM prints made on the Ultimaker printers: ~$0.20 per cc
+  * FDM prints made on the Ultimaker printers: $1.50 per hour (internal), $6.00 per hour (external)
-  * FDM prints made on the Stratasys F270:     ~$0.20 per cc + $10 if a new build tray is used
+      * PLA: ~$0.25 per cc
-  * SLA prints made on the Formlabs printers:  ~$0.50 per cc
+      * ABS: ~$0.31 per cc
-  * Polyjet prints made on the Objet 30 Pro:   ~$1.00 per cc + $11.44
+      * CPE: ~$0.27 per cc
+      * Nylon: ~$0.34 per cc
+      * PVA Support Material: ~$0.35 per cc
+  * FDM prints made on the Stratasys F270: $3.00 per hour (internal), $16.00 per hour (external)
+      * ABS/ASA: ~$0.26 per cc
+      * QSR Support Material: $0.31 per cc
+  * SLA prints made on the Formlabs printers: $3.00 per hour (internal), $9.00 per hour (external)
+      * Form-Black: $0.53 per cc
+      * Form-Clear: $0.53 per cc
+      * Form-Draft: $0.53 per cc
+      * Form-Durable: $0.59 per cc
+      * Form-Flex: $0.65 per cc
+      * Form-Rigid 10K: $0.67 per cc
+      * Form-Tough: $0.59 per cc
+  * Polyjet prints made on the Objet 30 Pro:   ~$0.35 per cc + $12.14 per hour
   * SLA prints made on the MiiCraft* printer:  ~$1.14 per cc
@@ Line 9: / Line 23: @@
 Ultimaker's Cura and Formlabs' PreForm are both free to download and will calculate the volume of your part as well as increase your familiarity with the software.
+**Notice**
+Recharge rates will be updated soon for 2023. Please review the proposed [[2023 rates]] and send any feedback to the lab manager.