Differences

This shows you the differences between two versions of the page.

--- einscantrainginsop [2020/09/01 18:08] – [Safe Operation of this Tool] furst
+++ einscantrainginsop [2023/01/06 01:08] (current) – [EinScan-SP Training SOP] haley
@@ Line 2: / Line 2: @@
 Last edited: Furst (8/28/20)
-Instructor:
-Date:
-{| style=""
-|+ Attendees:
-!
-!
-Name
-!
-Group or Company
-!
-Signature
-|-
-|1
-|
-|
-|
-|-
-|2
-|
-|
-|
-|-
-|3
-|
-|
-|
-|-
-|4
-|
-|
-|
-|-
-|5
-|
-|
-|
-|-
-|6
-|
-|
-|
-|}
------
 ====Overview:====
@@ Line 222: / Line 175: @@
 Remove the calibration board from the stand and place in the protective drawstring bag. Remove the stand from the turntable and proceed with scanning.
+-----
+ ====Einscan Quick Review====
+Tool Lead:    \\
+Contact: andrewfurst@ucsb.edu      \\
+====Safety Concern====
+  * Lab coat and gloves must me used when handling resin
+  * Anything with uncured resin must be transported within a container to avoid spilling
+====Safe Operation Procedures Review====
+  - Create a new project and designate file location
+  - Select desired texture mode (texture uses color data whereas non texture takes less time)
+  - Adjust brightness slider to properly expose image
+  - Select desired scanning mode (turntable or tripod are standard)
+  - Start Scan
+  - After scan completion using shift + left click to remove extraneous data
+  - Correct any misalignment using the align and shift + left click to select coincident points
+====Post Processing and exporting====
+  - Select mesh to convert to mesh body
+  - Select watertight to create closed object or unwatertight to edit object file
+  - Select desired simplification ratio (to reduce processor stress) and file type (.STL, .OBJ, .PLY, .3MF, or .ASC)
+====Maintenance====
+  * Calibration should take place once a week or before a scan for optimal accuracy
+  * Scanner and turntable should be wiped down frequently
+  * Computer should be restarted periodically and plugged in