Differences

This shows you the differences between two versions of the page.

--- einscan-sp [2023/01/06 01:07] – [About] haley
+++ einscan-sp [2023/01/06 01:31] (current) – [EinScan-SP 3D Scanner] haley
@@ Line 10: / Line 10: @@
 | **Manufacturer:**               EinScan                           |
+Last updated 1/5/23 Haley
 ----
@@ Line 17: / Line 18: @@
 ----
-===== Training Documentation =====
-[[EinscanTrainginSOP|EinScan SOP]]
------
+===== Safety Concerns =====
+  * Do not look directly into the scanners light projector.
+  * Do not interfere with turntable or part while scanner is working
+----
+===== Operating Procedures =====
+  - Create a new project and designate file location
+  - Select desired texture mode (texture uses color data whereas non texture takes less time)
+  - Adjust brightness slider to properly expose image
+  - Select desired scanning mode (turntable or tripod are standard)
+  - Start Scan
+  - After scan completion using shift + left click to remove extraneous data
+  - Correct any misalignment using the align and shift + left click to select coincident points
+  - Select mesh to convert to mesh body
+  - Select watertight to create closed object or unwatertight to edit object file
+  - Select desired simplification ratio (to reduce processor stress) and file type (.STL, .OBJ, .PLY, .3MF, or .ASC)
+----
 ===== Detailed Specifications =====
@@ Line 31: / Line 51: @@
 ----
-===== Safety Concerns =====
-  * Do not look directly into the scanners light projector.
-  * Do not interfere with turntable or part while scanner is working
-----
 ===== Reference Documentation =====
+[[EinscanTrainginSOP|EinScan SOP]]
 {{:tools:einscan-sp:einscan-sp_guidebook.pdf|}}