Innovation Workshop Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Haas Super Mini Mill =====


^                      Haas                             ^
|       {{ :tools:haasminimill:haas_mini_mill.jpg?nolink&200 |}}        |
| **Tool Type:**                  CNC                           |
| **Location:**                   Elings 3430                          |



| **Description:**                CNC milling machine                          |
| **Manufacturer:**               Haas                           |

Last edited 8/26/22 Haley 
----

===== About =====

The Haas Super Mini Mill is a CNC milling machine. Parts can be modeled in SOLIDWORKS and then toolpaths are programmed through an HSM add-in that generates G-code for the machine to read. The Haas can read  G-code and .EGC files. ** Due to its complexity, we do not offer regular training for this tool.** If you just need it for a few parts, please use our [[https://docs.google.com/forms/d/e/1FAIpQLSeQZ5JnKzOf-UZA0yWZ1XwLGQjmtgyEOFxxHWpZWUUIa8OxcA/viewform|Job Submission Google Form]] and we will machine them for you. If you believe you have a strong need to use this tool, please contact the lab manager.
----

===== Safety Concerns =====
  * Safety Glasses must be worn when machine is running
  * The glass doors must be in closed before starting a job
  * The spindle must be completely stopped before adjusting or removing work piece or tool
  * After milling is completed, the work piece will have developed sharp burrs which must be removed with a hand file or sandpaper
  * Proof your program before running it. The first time you run it, slow the rapid speed and stay by the control panel. It is a good idea to use single block mode the first time you run your program.

----

===== Training Documentation =====

[[Haas Super Mini Mill Training SOP]]

[[Haas mill setup checklist]]

----

===== Detailed Specifications =====
406 x 305 x 254 mm, 40 taper, 15 hp vector drive, 10,000 rpm, 30.5 m/min rapids, high-speed 10-station automatic tool changer, coolant pump, power-failure detection module, 1 GB program memory, 15″ colour LCD monitor, USB port, memory lock keyswitch, and rigid tapping. Three-phase power only.

  * X-axis: 16"
  * Y-axis: 12"
  * Z-axis: 10"
  * Spindle nose to table: 14" max 4" min
  * Table length: 36"
  * Work area length: 28.75"
  * Width: 12"
  * T-slot width: 12"
  * T-slot center distance: 4.33"
  * # T-slots: 3
  * Max load on table: 500 lb
  * Max spindle rating: 15 hp
  * Max speed: 10,000 rpm
  * Max torque: 17 ft-lb @ 4600 rpm
  * Taper: 40
  * Rapids: 1200 in/min
  * Max cutting: 833 in/min
  * Max thrust: 2000 lb
  * Max tool diameter: 3.5"


----


===== Reference Documentation =====
{{:tools:haasminimill:haas-pre-install-manual.pdf|Pre Install Manual}}

{{:tools:haasminimill:haas_mill_programming_manual.pdf|Programming Manual}}

{{:tools:haasminimill:haas_mill_wips_probe_training_manual.pdf|Probe Training Manual}}

{{:tools:haasminimill:mill_operators_manual_96-8200_rev_b_october_2014.pdf|Operators Manual}}

{{:tools:haasminimill:programming_workbook.pdf|Programming Workbook}}

[[RS232 file transfer documentation]]

{{:tools:haasminimill:nexgen_cam_cnc_book.pdf|Haas / HSMWorks Intro Text}}

-----