Innovation Workshop Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Diamond Saw ======


^            Diamond Saw                    ^
|                  {{:tools:diamondsaw:trimsaw-2-rotate.jpg?200|}}                                                     |
| **Tool Type:**                  Cutting tool                           |
| **Location:**                   Elings 3430                           |


| **Description:**                Trim Saw 2 with diamond blade for glass slides                         |
| **Manufacturer:**               Allied                           |

----

===== About =====
The Trimsaw 2 is a saw designed for rapid sectioning of printed circuit boards, ceramic substrates and other abrasive non metals. Contains a built in reservoir which can be used to feed lubrication directly to the blade.

----

===== Safety Concerns =====
  * Keep hands clear of blade when machine is on
  * Use only approved blades and do not cut metals with  sectioning blades
  * Use coolant or lubrication when making cuts
  * Use fixtures and guides whenever possible to reduce risk of slipping into the blade

----

=====Training Documentation=====

[[trimsaw2SOP]]


-----

===== Detailed Specifications =====
Motor power: .25 HP
Speed range: 500-3000 RPM by 100 RPM increments
Cutting platform: 6.75" x 12.5"
Blade size: 4"-6"
-----


===== Reference Documentation =====
  * [[http://consumables.alliedhightech.com/Sectioning-s/1818.htm|Allied blade catalog]]
  * [[https://www.ukam.com/|UKAM Industrial Superhard Tools]]
  * {{ :wiki:msds:kool_mist_78_msds.pdf |Kool Mist MSDS}}


-----