Innovation Workshop Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

======Bambu Lab X1-Carbon 3D Printer======

^                 X1-Carbon                       ^
|              {{ :tools:bambulabs_x1c.jpg?nolink&350 |}}                |                                  
| **Tool Type:**                  3D printer                    |
| **Location:**                   uFL 3430           |



| **Description:**                FDM 3D printer                |
| **Manufacturer:**               Bambu Lab                     |

----

======About======
The Bambu X1C is located in Elings 3430 next to the Ultimaker. It is an FDM printer which extrudes melted filament onto a textured build plate. Currently, it uses ABS, PLA, PETG, and TPU; all in a very limited variety of colors. It's one of our fastest printers while still maintaining a high quality.

------
======Detailed Specifications======
Nozzle tip sizes: 0.2 mm nozzle, 0.4 mm nozzle, 0.6 mm nozzle \\
Build volume: 256 mm x 256 mm x 256 mm \\
X,Y accuracy: ~200 microns
------

======Training Documents======

[[x1carbon_sop|X1-Carbon SOP]]

------