Innovation Workshop Wiki

User Tools

Site Tools

Trace:
whatprintershouldiuse

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
whatprintershouldiuse [2023/01/19 22:50] – [Ultimaker] bdincauwhatprintershouldiuse [2023/08/02 18:38] (current) – rylin
Line 1: Line 1:
 =====Which 3D Printer is Best for my part?===== =====Which 3D Printer is Best for my part?=====
-Depending on the geometry of a part, its application, and its environment a particular 3D printer or material may be desirable to use due to its properties. While many different printers may work for a particular job, selecting the wrong printer may lead to drastically overpaying or overbuilding a part for its application. On the other hand using the wrong printer and material could lead to part warping due to moisture after instillation, or even print failure due to material geometry confliction. Selecting the right printer and material can go a long way to creating successful, long lasting parts.+Depending on the geometry of a part, its application, and its environment, a particular 3D printer or material may be desirable to use due to its properties. While many different printers may work for a particular job, selecting the wrong printer may lead to drastically overpaying or overbuilding a part for its application. On the other hand using the wrong printer and material could lead to part warping due to moisture after instillation, or even print failure due to material geometry confliction. Selecting the right printer and material can go a long way to creating successful, long lasting parts.
  
 =====Ultimaker===== =====Ultimaker=====
-The Ultimaker printers are FDM filament fed 3D printers. Each has two extruders set up with build and support material with a tip width of .25,.4,.6 and .8 mm available. Layer lines are visible with this printer with slice heights of 60-200 micron, and this printer can print variable infill from 10% to 100%. +The Ultimaker printers are FDM filament-fed 3D printers. Each has two extruders set up with build and support material with a tip width of .25,.4,.6 and .8 mm available. Layer lines are visible with this printer with slice heights of 60-200 micron, and this printer can print variable infill from 10% to 100%. 
  
 Default material: ABS (orange) & PVA (dissolvable) Default material: ABS (orange) & PVA (dissolvable)
Line 12: Line 12:
     * PLA     * PLA
     * PVA (dissolvable support)     * PVA (dissolvable support)
-    * nylon+    * Nylon
     * CPE     * CPE
     * Flexible     * Flexible
-  * Cheep and easy to run printer+  * Cheap and easy to run printer
   * Easy to switch filaments    * Easy to switch filaments 
   * Capable of creating large overhangs with less support filament (tree support)    * Capable of creating large overhangs with less support filament (tree support) 
-  * Highest chance of print failure+  
  
 **Cons:** **Cons:**
   * Requires post processing    * Requires post processing 
-  * Susceptible to warping due to moisture+  * Susceptible to warping due to moisture and uneven cooling 
 +  * Most likely printers to fail
  
 ----- -----
  
 =====F270===== =====F270=====
-The F270 is also a duel extruder FDM filament fed printer typically set up with build and support material. Layer lines are visible with variable slice height from 127-330 micron. Variable infill from 10%-100% is available.+The F270 is also a dual extruder FDM filament fed printer typically set up with build and support material. Layer lines are visible with variable slice height from 127-330 micron. Variable infill from 10%-100% is available.
  
  
-Default material: ABS (blue) & SQR (support)+Default material: ABS, ASA, QSR (dissolvable support)
  
 **Pros:** **Pros:**
   * Quick easy printing resulting in fast turn around time   * Quick easy printing resulting in fast turn around time
   * Capable of printing the largest prints (305x254 mm)   * Capable of printing the largest prints (305x254 mm)
 +  * Extremely reliable
 +  * Produces strong even parts due to heated chamber
  
 **Cons:** **Cons:**
-  * Difficult to switch filament  +  * Relatively poor resolution for small parts (~1mm) 
-  * Requires NaOH post process bath to remove support material+  * Typically requires post process bath to remove support material
  
 ----- -----
  
-=====Form 2===== +=====Form 3===== 
-The Form 2 printer is a SLA resin printer capable of very high precision. USing UV light to cure the resin bath, layer lines are less pronounced with slice heights from 25-100 or 50-100 (durable & tough) micron depending on the resin. +The Form 3 printer is a SLA resin printer capable of very high precision. Using UV light to cure the resin bath, layer lines are less pronounced with slice heights from 25-100 microns depending on the resin. 
  
-Default material: NA+Default material: N/A
  
 **Pros:** **Pros:**
Line 53: Line 56:
     * Durable     * Durable
     * Tough     * Tough
-    * Flexable +    * Flexible 
-    * Black+    * Black (and many more)
   * Able to produce optically clear parts   * Able to produce optically clear parts
   * Able to produce sharp points/thin risers    * Able to produce sharp points/thin risers 
 +  * Very reliable for standard prints
  
 **Cons:** **Cons:**
Line 65: Line 69:
 ----- -----
  
-=====Objet=====+=====Objet30 Pro=====
 Default material: RGD450 & support Default material: RGD450 & support
  
 **Pros:** **Pros:**
-  * Able to produce smooth high quality surface finish (not on overhangs)+  * Able to produce smooth high quality surface finish on the top face (good for molds)
   * Requires very little post processing    * Requires very little post processing 
   * Low chance of print failure   * Low chance of print failure
Line 76: Line 80:
   * Highest material cost of all printers   * Highest material cost of all printers
   * Slow printing time   * Slow printing time
-  * Pressure wash required to remove support material+  * Produces slightly rounded edges, due to the nature of polyjet printing.
  
  
 ----- -----
  
-WORK IN PROGRESS 
whatprintershouldiuse.1674168611.txt.gz · Last modified: 2023/01/19 22:50 by bdincau