Differences

This shows you the differences between two versions of the page.

--- trotec_speedy [2023/07/12 16:42] – rylin
+++ trotec_speedy [2024/09/26 19:47] (current) – epace
@@ Line 5: / Line 5: @@
 |         {{ :tools:trotecspeedy:trotec_speedy.jpg?nolink&200 |}}            |
 | **Tool Type:**                  Laser cutter                                |
-| **Location:**                   Microfluidics Lab                                |
+| **Location:**                   Elings 3430                                |
@@ Line 24: / Line 24: @@
   * Always wear safety glasses when using the machine.
   * Always work with the machine cover closed.
-  * NEVER leave the laser machine alone when running a job. If you do need to leave,
+  * NEVER leave the laser machine alone when running a job. If you do need to leave, make sure there is someone else nearby who is aware that it is on and cutting.
   * The machine door must be left open while you are away.
   * Do not store any flammable materials in the inside of the device or in the immediate vicinity of the device.
@@ Line 34: / Line 34: @@
   * Looking directly into the laser can cause retinal damage.
   * Confirm that the fume collection system is running whenever the laser is cutting or engraving.
+  * Whenever heat is a concern, please use the nitrogen air assist. This includes cutting features with high surface density, or cutting materials that like to melt, such as delrin.
 ----
@@ Line 45: / Line 46: @@
 ===== Detailed Specifications =====
-  * Unordered List ItemWorking area (W x D): 24 x 12 in
+  * Working area (W x D): 24 x 12 in
   * Max. height of workpiece : 5.2 in
   * Loading area (W x D): 27 in x 17 in
   * Overall dimensions (W x D x H): 40 x 31 x 40 in
-  * Max. processing speed: 110 ips
+  * Max. processing speed: 1.8 m/s
   * Max. acceleration: 1,969 ips²
   * Technology motion system: Brushless DC servo motors