Differences

This shows you the differences between two versions of the page.

--- thinky_mixer [2022/09/13 20:24] – [About] haley
+++ thinky_mixer [2024/09/26 19:38] (current) – epace
@@ Line 1: / Line 1: @@
 ====== Thinky ARE-310 Mixer ======
-^                         Thinky ARE-310 Mixer                          ^
+^                         Thinky Mixer                          ^
 |         {{ :tools:thinkymixer:thinky_mixer.jpg?nolink&200 |}}         |
-| **Tool Type:**                  "TEXT HERE"                           |
+| **Tool Type:**                  PDMS                           |
-| **Location:**                   "TEXT HERE"                           |
+| **Location:**                   Elings 3430                           |
-|  **Supervisor**        |  **Tool Lead**  |
-|  David Bothman         |  "WW Name"  |
-|  (805) 893-4125        |  (###) ###-####  |
-|  bothman@cnsi.ucsb.edu  |  "WW Email"  |
-| **Description:**                "TEXT HERE"                           |
+| **Description:**                PDMS mixing tool                           |
-| **Manufacturer:**               "TEXT HERE"                           |
+| **Manufacturer:**               Thinky                           |
+Last updated 9/13/22 Haley
 ----
 ===== About =====
-The thinky mixer is one of the PDMS tools in the Microfluidics lab. This machine is used for mixing and
+The Thinky Mixer is one of the PDMS tools in the Microfluidics Station in 3430. This machine is used for mixing and
-de-aerating the elastomers that are used in fabrication of Microfluidic devices. The mixing time and
+de-aerating the elastomers that are used in fabrication of microfluidic devices. The mixing time and
 revolution speed of the device can be programmed using the machine’s controller interface.
 ----
-===== Detailed Specifications =====
+===== Safety Concerns =====
-Insert Text Here!
+Goggles, gloves, a lab coat, long pants, and close-toed shoes should be worn while operating this machine. Long hair should be tied back. Review Sylgard 184 resin SOP before handling.
 ----
-===== Safety Concerns =====
+===== Training Documentation =====
-Insert Text Here!
+{{ :tools:thinkymixer:thinky_are-310_mixer_programming_handout.pdf |}}
 ----
-===== Operating Procedures =====
+===== Detailed Specifications =====
-Insert Text Here!
+  * 310g capacity
+  * Centrifugal force of over 400G
+  * Cold-insulated, heat-resistant adapter enables support of various material characteristics
+  * Memory and step-operation functions for controlling and executing operating condition
+  * 2 modes of mixing and deaeration achieve dispersion and deaeration of high-viscosity materials in a small amount of time
 ----
@@ Line 43: / Line 45: @@
 ===== Reference Documentation =====
 {{:tools:thinkymixer:thinky_are-310_mixer_manual.pdf|}}
-{{ :tools:thinkymixer:thinky_are-310_mixer_programming_handout.pdf |}}
 [[https://www.youtube.com/watch?v=7lsAd9Uu_vA&feature=youtu.be|Using the Thinky Mixer (video)]]
@@ Line 50: / Line 50: @@
 -----
-===== Training Documentation =====
-Insert Text Here!
-----