Differences

This shows you the differences between two versions of the page.

--- stratasys_f270 [2023/01/05 02:53] – [Stratsys F270 FDM 3D Printer] haley
+++ stratasys_f270 [2024/09/26 19:35] (current) – epace
@@ Line 2: / Line 2: @@
-^                Stratsys F270 FDM 3D Printer                           ^
+^                F270                          ^
 |                      {{:tools:stratasysf270:stratasysf270.jpeg?200|}}                 |
 | **Tool Type:**                  3D printer                           |
-| **Location:**                   Innovation Workshop                           |
+| **Location:**                   Elings 3430                           |
-|  **Supervisor**        |  **Tool Lead**  |
+| **Description:**                Enclosed duel extrusion FDM 3D printer                           |
-|  David Bothman         |  "Andrew Furst"  |
-|  (805) 893-4125        |  (801) 928-8869  |
-|  bothman@cnsi.ucsb.edu  |  "andrewfurst@ucsb.edu"  |
-| **Description:**                FDM duel extrusion 3D printer                           |
 | **Manufacturer:**               Stratasys                           |
@@ Line 20: / Line 15: @@
 ===== About =====
-The F270 is a fast and precise filament fed fusion deposition printer. Typically set up with ABS and a soluble filament that is dissolved in a heated caustic bath.
+The F270 is a fast and precise filament fed fusion deposition printer. It is typically set up with ABS and a soluble filament that is dissolved in a heated caustic bath.
 ----
@@ Line 28: / Line 23: @@
   * The print heads can be very hot - do not touch them with bare hands unless positive they are cool.
   * As with any automated machinery make sure that your body is clear of the moving parts to avoid injury.
-  * The support removal tank for the F270 is filled with heated caustic chemicals that dissolve the support material. An apron, Gloves, and a face shield must be warn when inserting and removing parts or basket from tank.
+  * The support removal tank for the F270 is filled with heated caustic chemicals that dissolve the support material. An apron, gloves, and a face shield must be worn when inserting and removing parts or basket from tank.
 ----