Differences

This shows you the differences between two versions of the page.

--- spin_coater [2023/01/06 01:23] – [Laurell WS-650M Spin Coater] haley
+++ spin_coater [2024/09/26 19:37] (current) – epace
@@ Line 5: / Line 5: @@
 |              {{ :tools:spincoater:spin_coater.jpg?nolink&200 |}}      |
 | **Tool Type:**                  PDMS                          |
-| **Location:**                   Microfluidics Lab                          |
+| **Location:**                   Elings 3430                          |
@@ Line 23: / Line 23: @@
 ===== Safety Concerns =====
-**Pinching Hazard** Be careful when closing and opening the spin coater lid. \\
+**Pinching Hazard:** Be careful when closing and opening the spin coater lid. \\
-**High Velocity Debris** By default, an interlock prevents the spin coater from operating while the lid is open. Nonetheless, substrates spin at a high speed and vacuum chuck failure is possible for less-than-flat samples. Always wear safety goggles when operating this tool and ensure the spinner has come to a complete stop before opening the lid.
+**High Velocity Debris:** By default, an interlock prevents the spin coater from operating while the lid is open. Nonetheless, substrates spin at a high speed and vacuum chuck failure is possible for less-than-flat samples. Always wear safety goggles when operating this tool and ensure the spinner has come to a complete stop before opening the lid.
 ----