Differences

This shows you the differences between two versions of the page.

--- spin_coater [2023/01/05 02:03] – [Laurell WS-650M Spin Coater] haley
+++ spin_coater [2024/09/26 19:37] (current) – epace
@@ Line 2: / Line 2: @@
-^             Laurell WS-650M Spin Coater                               ^
+^             Spin Coater                               ^
 |              {{ :tools:spincoater:spin_coater.jpg?nolink&200 |}}      |
-| **Tool Type:**                  Spin Coater                          |
+| **Tool Type:**                  PDMS                          |
-| **Location:**                   Elings 3430                           |
+| **Location:**                   Elings 3430                          |
-|  **Supervisor**        |  **Tool Lead**  |
-|  Brian Dincau         |  n/a  |
-|  (805) 724-0426‬        |  n/a  |
-|  workshop-manager@cnsi.ucsb.edu  |  n/a  |
 | **Description:**                Spin coater for applying thin coatings of PDMS and other resins                           |
 | **Manufacturer:**               Laurell                         |
-Last updated 1/4/23 Haley
 ----
@@ Line 28: / Line 23: @@
 ===== Safety Concerns =====
-**Pinching Hazard** Be careful when closing and opening the spin coater lid. \\
+**Pinching Hazard:** Be careful when closing and opening the spin coater lid. \\
-**High Velocity Debris** By default, an interlock prevents the spin coater from operating while the lid is open. Nonetheless, substrates spin at a high speed and vacuum chuck failure is possible for less-than-flat samples. Always wear safety goggles when operating this tool and ensure the spinner has come to a complete stop before opening the lid.
+**High Velocity Debris:** By default, an interlock prevents the spin coater from operating while the lid is open. Nonetheless, substrates spin at a high speed and vacuum chuck failure is possible for less-than-flat samples. Always wear safety goggles when operating this tool and ensure the spinner has come to a complete stop before opening the lid.
 ----