Differences

This shows you the differences between two versions of the page.

--- sandersop [2022/07/14 19:42] – dave
+++ sandersop [2022/07/14 20:20] (current) – [Overview] dave
@@ Line 1: / Line 1: @@
-=====CNSI Innovation Workshop Combination Sander User Outline=====
+=====CNSI Innovation Workshop Grizzly H8192 Combination Belt/Disk Sander User Outline=====
-This guide may be found online through the Innovation Workshop and Microfluidics wiki.
 ====Location====
 The combination belt/disk sander is located in 2448 Elings Hall on the bench next to Fume Hood #3.
@@ Line 13: / Line 12: @@
 ====Training====
 Training is required before using the sander.
+===Training Outline===
+  - Explain parts of the tool
+  - Review safety concerns
+  - Demonstrate safe use of the tool
+  - Show location of supplies
+  - Demonstrate how to change belts/disks
+  - Cleanup
 ====Overview====
-The grinder is a benchtop sander with a 1" wide x 42" long sanding belt, and an 8" disk sander driven by a common motor. Each of these sanders has a separate vacuum port connection.
+The tool is a benchtop sander with a 1" wide x 42" long sanding belt, and an 8" disk sander driven by a common motor. Each of these sanders has a separate vacuum port connection.
 ====User Guide====
 **Sequence of operation:**
@@ Line 33: / Line 39: @@
   * In the event of injury, contact lab staff and emergency services if necessary (?)
 ====Maintenance====
-  * Use wire brushes to clear metal residue out of grinding wheel
+  * Change sandpaper as necessary
-  * Adjust grinding wheel guide as wheel wears
+  * Clean dust off of machine and work area
 ====Supplies (In drawer labeled “Grinder Accessories”)====
   * 1" x 42" sanding belts