Differences

This shows you the differences between two versions of the page.

--- sae_battery_segment_manufacture_assembly [2023/06/06 18:55] – Battery segments wei
+++ sae_battery_segment_manufacture_assembly [2023/06/06 18:58] (current) – wei
@@ Line 60: / Line 60: @@
 ====Machining of insulation panels====
-  - Fixture panels, program cam, and set up tools on ShopBot Router referencing [[http://microfluidics.cnsi.ucsb.edu/wiki/doku.php?id=shopbotdesktoptrainingsop|ShopBot SOP]] {{:wiki:fsae:insulationcnc.jpg}}
+  - Fixture panels, program cam, and set up tools on ShopBot Router referencing [[http://microfluidics.cnsi.ucsb.edu/wiki/doku.php?id=shopbotdesktoptrainingsop|ShopBot SOP]]
+{{:wiki:fsae:insulationcnc.jpg?400}}
     *Set up vacuum attachment and wear masks to minimize inhalation of fine fiberglass particles
   - File edges of panels to remove sharp glass fibers
 ====Assembly of Enepaq modules within insulation====
-  - Insert modules with correct polarities and use epoxy to bond base and side panels of segment {{:wiki:fsae:batterysegmentclamp.png}}
+  - Insert modules with correct polarities and use epoxy to bond base and side panels of segment
+{{:wiki:fsae:batterysegmentclamp.png}}
   - **Wear proper PPE (listed in safety considerations section); those without PPE should remain five feet away** and connect modules together using bolts and busbars
     * **Cover work surface and ground with electrically insulating mat and use insulated tools**
@@ Line 71: / Line 73: @@
     * Attach temperature sensing wires to module xr connector
   - Route wires through holes in top panel
-  - Connect voltage taps carefully and avoid short circuiting any modules {{:wiki:fsae:batterybusbarconnection.png}}
+  - Connect voltage taps carefully and avoid short circuiting any modules
-  - Bond top panels to enclose segment  {{:wiki:fsae:batterysegmentclamp2.png}}
+{{:wiki:fsae:batterybusbarconnection.png}}
+  - Bond top panels to enclose segment
+{{:wiki:fsae:batterysegmentclamp2.png}}