Differences

This shows you the differences between two versions of the page.

--- laminator [2023/04/06 01:54] – [Safety Concerns] haley
+++ laminator [2024/09/26 19:50] (current) – epace
@@ Line 1: / Line 1: @@
-====== SCA 1200 HT NaOH Parts Bath ======
+====== Laminator ======
 ^                                    ProLam Ultra         ^
-|                 |
+|          {{ :laminator.png?200 |}}       |
-| **Tool Type:**                  hi                          |
+| **Tool Type:**                  Laminator                         |
-| **Location:**                   Innovation Workshop                          |
+| **Location:**                   Elings 3430                          |
@@ Line 16: / Line 16: @@
 ===== About =====
-This tool is used to laminate a standard-size piece of paper. The laminator and laminating pouches can be found by the window in the Innovation Workshop closest to the ShopBot. The laminating pouches are 3mil.
+This tool is used to laminate a standard-size piece of paper. The laminator and laminating pouches can be found by the corner of 3430 next across from the hot press and keyence microscope. The laminating pouches are 3mil.
 ----
 ===== Safety Concerns =====
+  * The tool heats up to 100C for our 3mil sheets or a max of 130C. Be mindful of your hands.
-The tool heats up to 100C for our 3mil sheets or a max of 130C. Be mindful of your hands.
+  * **Do NOT switch the machine off before it has cooled down.**
-**Do NOT switch the machine off before it has cooled down.**
 ----
@@ Line 35: / Line 34: @@
   - Press "MEMO" and then "STOP" to turn off the machine
   - The display will say "Cool". Do NOT switch it off before it has finished cooling down. It will power off on its own when it has cooled.
-  - Make sure the machine cools down and turns off on its own before leaving the lab.
+  - Make sure the machine cools down and turns off on its own before leaving the lab. It will beep when it has cooled and turned off, and then the display will go blank.
 ----