Differences

This shows you the differences between two versions of the page.

--- haas_mini_mill [2022/08/26 23:08] – [Detailed Specifications] haley
+++ haas_mini_mill [2024/09/26 19:42] (current) – epace
@@ Line 1: / Line 1: @@
-====== Haas Super Mini Mill ======
+====== Haas Super Mini Mill =====
-^                      Haas Super Mini Mill                             ^
+^                      Haas                             ^
 |       {{ :tools:haasminimill:haas_mini_mill.jpg?nolink&200 |}}        |
-| **Tool Type:**                  "CNC"                           |
+| **Tool Type:**                  CNC                           |
-| **Location:**                   "mFL 3430"                           |
+| **Location:**                   Elings 3430                          |
-|  **Supervisor**        |  **Tool Lead**  |
-|  David Bothman         |  David Bothman  |
-|  (805) 893-4125        |  (805) 893-4125   |
-|  bothman@cnsi.ucsb.edu  |  bothman@cnsi.ucsb.edu  |
 | **Description:**                CNC milling machine                          |
 | **Manufacturer:**               Haas                           |
+Last edited 8/26/22 Haley
 ----
 ===== About =====
-The Haas Super Mini Mill is a CNC milling machine. Parts can be modeled in SOLIDWORKS and then toolpaths are programmed through an HSM add-in that generates G-code for the machine to read. The Haas can read  G-code and .EGC files.
+The Haas Super Mini Mill is a CNC milling machine. Parts can be modeled in SOLIDWORKS and then toolpaths are programmed through an HSM add-in that generates G-code for the machine to read. The Haas can read  G-code and .EGC files. ** Due to its complexity, we do not offer regular training for this tool.** If you just need it for a few parts, please use our [[https://docs.google.com/forms/d/e/1FAIpQLSeQZ5JnKzOf-UZA0yWZ1XwLGQjmtgyEOFxxHWpZWUUIa8OxcA/viewform|Job Submission Google Form]] and we will machine them for you. If you believe you have a strong need to use this tool, please contact the lab manager.
 ----
-===== Detailed Specifications =====
+===== Safety Concerns =====
-x 305 x 254 mm, 40 taper, 15 hp vector drive, 10,000 rpm, 30.5 m/min rapids, high-speed 10-station automatic tool changer, coolant pump, power-failure detection module, 1 GB program memory, 15″ colour LCD monitor, USB port, memory lock keyswitch, and rigid tapping. Three-phase power only.
+  * Safety Glasses must be worn when machine is running
+  * The glass doors must be in closed before starting a job
+  * The spindle must be completely stopped before adjusting or removing work piece or tool
+  * After milling is completed, the work piece will have developed sharp burrs which must be removed with a hand file or sandpaper
+  * Proof your program before running it. The first time you run it, slow the rapid speed and stay by the control panel. It is a good idea to use single block mode the first time you run your program.
-X-axis: 16"
+----
-Y-axis: 12"
-Z-axis: 10"
-Spindle nose to table: 14" max 4" min
-Table length: 36"
-Work area length: 28.75"
-Width: 12"
-T-slot width: 12"
-T-slot center distance: 4.33"
-# T-slots: 3
-Max load on table: 500 lb
-Max spindle rating: 15 hp
-Max speed: 10,000 rpm
-Max torque: 17 ft-lb @ 4600 rpm
-Taper: 40
-Rapids: 1200 in/min
-Max cutting: 833 in/min
-Max thrust: 2000 lb
-Max tool diameter: 3.5"
+===== Training Documentation =====
-----
+[[Haas Super Mini Mill Training SOP]]
-===== Safety Concerns =====
+[[Haas mill setup checklist]]
-Insert Text Here!
 ----
-===== Operating Procedures =====
+===== Detailed Specifications =====
+x 305 x 254 mm, 40 taper, 15 hp vector drive, 10,000 rpm, 30.5 m/min rapids, high-speed 10-station automatic tool changer, coolant pump, power-failure detection module, 1 GB program memory, 15″ colour LCD monitor, USB port, memory lock keyswitch, and rigid tapping. Three-phase power only.
+  * X-axis: 16"
+  * Y-axis: 12"
+  * Z-axis: 10"
+  * Spindle nose to table: 14" max 4" min
+  * Table length: 36"
+  * Work area length: 28.75"
+  * Width: 12"
+  * T-slot width: 12"
+  * T-slot center distance: 4.33"
+  * # T-slots: 3
+  * Max load on table: 500 lb
+  * Max spindle rating: 15 hp
+  * Max speed: 10,000 rpm
+  * Max torque: 17 ft-lb @ 4600 rpm
+  * Taper: 40
+  * Rapids: 1200 in/min
+  * Max cutting: 833 in/min
+  * Max thrust: 2000 lb
+  * Max tool diameter: 3.5"
-Insert Text Here!
 ----
 ===== Reference Documentation =====
@@ Line 71: / Line 74: @@
 {{:tools:haasminimill:programming_workbook.pdf|Programming Workbook}}
------
-===== Training Documentation =====
-[[Haas Super Mini Mill Training SOP]]
 [[RS232 file transfer documentation]]
@@ Line 82: / Line 79: @@
 {{:tools:haasminimill:nexgen_cam_cnc_book.pdf|Haas / HSMWorks Intro Text}}
-[[Haas mill setup checklist]]
+-----
-----