Differences

This shows you the differences between two versions of the page.

--- cricut_sop [2020/10/09 18:24] – furst
+++ cricut_sop [2023/01/06 01:04] (current) – [Cricut Maker Training SOP] haley
@@ Line 1: / Line 1: @@
 ======Cricut Maker Training SOP======
 Last edited: Furst (10/08/20)
-Instructor: \\
-Date: \\
-{| style=""
-|+ Attendees:
-!
-!
-Name
-!
-Group or Company
-!
-Signature
-|-
-|1
-|
-|
-|
-|-
-|2
-|
-|
-|
-|-
-|3
-|
-|
-|
-|-
-|4
-|
-|
-|
-|-
-|5
-|
-|
-|
-|-
-|6
-|
-|
-|
-|}
 ====Overview:====
@@ Line 66: / Line 21: @@
   - **At the Computer:**:
     -Parts can be designed beforehand and brought into the lab in .PDF or .DXF file form and imported into Cricut software or parts can also be designed within Cricut's software
-    - Click "new" to enter a new design work space
+    - Click "new" to enter a new design work space \\ {{:tools:cricut:original_menu.png?400|}}
     - Shapes, text, or pre designed files can now be imported using the menu to the left of the screen
-      - Shapes can be resized by clicking and dragging on the bottom right corner or exact dimensions can be set using the width and height boxes on the top menu bar.
+      - Shapes can be resized by clicking and dragging on the bottom right corner or exact dimensions can be set using the width and height boxes on the top menu bar. \\ {{:tools:cricut:size_adj.png?400|}}
       - If importing a .PDF image file select "Upload" from the left side menu
-        - Upload image and select image quality. The higher the quality the harder to modify the image within the software
+        - Upload image and select image quality. The higher the quality the harder to modify the image within the software \\ {{:tools:cricut:immpage_quality.png?400|}}
-        - This will bring up the option to erase sections based on color or objects from the PDF if desired
+        - This will bring up the option to erase sections based on color or objects from the PDF if desired \\ {{:tools:cricut:beforetriming.png?400|}}
-        - Click to remove any parts of the image that are not desired to be cut out: this includes the backgrounds
+        - Click to remove any parts of the image that are not desired to be cut out: this includes the backgrounds \\ {{:tools:cricut:one_left.png?400|}} {{:tools:cricut:cutout.png?400|}}
         - Uploading .DXF files will simply cut along desired lines as .DXF files are typically 2D hairline drawings already
   - **At the Cricut:**
@@ Line 81: / Line 36: @@
     - Follow the instructions on the Carbide computer
       - Load the mat using the double arrow button
-      - Make sure the correct head and set up has been compleated
+      - Make sure the correct head and set up has been completed
       - Press the Cricut button to start the print
   - **Post Processing:**
@@ Line 89: / Line 44: @@
 ====Maintenance and Cleaning====
+  * Mats should be cleaned and have particulates removed after cutting is completed
+  * Protective layer should always be replaced to cover the adhesive surface of the mat
+  * Cutter should periodically be removed for inspection, cleaning of any adhesive residue that can build up on the blade, and to check for a dull or chipped blade
+  * Cricut should be vacuumed several times a month to remove lint and junk from cut materials from accumulating
 -----
@@ Line 96: / Line 54: @@
 Contact: Andrewfurst@ucsb.edu
 ====Safety Concerns====
-  * Both print heads and bed are heated during operation. Do not attempt to clean, remove, or adjust without allowing for adequate cool down time.
+  * The cutting heads are very sharp, caution should be taken whenever replacing or switching out the Cricut cutting head
-  * Keep hands clear of printer during operation. Pause print before clearing or adjusting print.
+  * As with any automated machinery make sure that your body is clear of the moving parts to avoid injury.
- ====Safe Operating Procedures Review====
-  - Launch Cura version 4 (blue icon)
-  - From connected printers, select IW-Ultimaker3
-  - Select File -> Open Files -> Open desired project (.STL file type)
-  - Using task bar on the left hand side, position model as desired
-  - From print settings, select slice height, infill percentage, and support
-  - Support can be generated using ether nozzle, typically nozzle one holds build material with nozzle two printing with dissolvable support material.
-  - Setting can be fined tuned using the "Custom" option from print settings
-  - Within custom settings, nozzle and build plate temps can be adjusted (build plate temps should be based off of build material)
-  - Save the file from Cura on a thumb drive
-  - Connect thumb drive to printer -> select desired file -> select print\\
-Note: Adjusting settings may lead to more (OR LESS) successful prints. Contact Workshop Wizard responsible for Ultimaker if print fails or knowledge of advanced settings is desired.
+ ====Safe Operating Procedures Review====
+  - Launch Cricut software from carbide computer
+  - Open a new design space
+  - Upload a .PDF image, .DXF flat pattern, or use Cricut's design space to create a 2D design
+  - .PDF images must have their backgrounds removed and the parts the user wishes to cut isolated by using the click to erase function which removes parts of the image based on color
+  - Click and drag objects to scale or position in the design space
+  - Remove the protective covering from the adhesive mats and carefully lay material to be cut as flat and uniformed as possible down on the adhesive layer
+  - Load the mat using the double arrows on the Cricut
+  - Follow instructions on Carbide computer, press the Cricut button to start cut
+  - Press unload button to remover mat from Cricut
 ====Maintenance====
-  * Bed should be cleaned with IPA between prints
+  * Mats should be cleaned and have particulates removed after cutting is completed
-  * Print heads and silicone head protector should be cleaned as needed
+  * Protective layer should always be replaced to cover the adhesive surface of the mat
-  * Filament should be dried before use if printer has been idle for several weeks
+  * Cutter should periodically be removed for inspection, cleaning of any adhesive residue that can build up on the blade, and to check for a dull or chipped blade
-  * Bed leveling should be completed every time print cores are swapped
+  * Cricut should be vacuumed several times a month to remove lint and junk from cut materials from accumulating
-  * Print cores should be swapped  or purged after clog or to change print line width. Used print heads should be kept for spare parts
 -----