Differences

This shows you the differences between two versions of the page.

--- brother_scanncut_dx [2026/01/29 22:27] – [Operating Procedures] epace
+++ brother_scanncut_dx [2026/01/29 22:36] (current) – [About] epace
@@ Line 20: / Line 20: @@
 ===== About =====
-The Cricut is a 2D paper cutter capable of cutting out precise designs with high accuracy. It is capable of cutting thin plastics, vinyl, cardstock, paper, and a whole lot else. The Cricut is located in the corner of the 3430 across from the hotpress and keyence microscope. A thin layer of material is attached to the sticky mat and fed through the Cricut, which cuts out any 2D shape desired.
+The Brother ScanNCut DX is a 2D paper cutter capable of cutting out precise designs with high accuracy. It is capable of cutting thin plastics, vinyl, cardstock, paper, fabric, foam, and more. The Brother is 3430 next to the strasys F270 printer. to use the cutter, a thin layer of material is attached to the sticky mat and fed through the machine, which cuts out any 2D shape desired. The cutting tool can also be switched out for a marker as well to draw designs.
+The Brother is able to cut materials up to 3 mm in thickness.
 ----
@@ Line 27: / Line 29: @@
 ===== Safety Concerns =====
-The Brother cutter uses a shielded razorblade to make cuts on the sticky mat. Care should be taken when replacing of switching the cutting head as it is incredibly sharp. Fingers should also be kept clear of the rollers when it is operating.
+The Brother cutter uses a shielded razorblade to make cuts on the sticky mat. Care should be taken when replacing of switching the cutting head as it is incredibly sharp. Fingers should also be kept clear of the rollers when it is operating to avoid pinching.
 ----
 ===== Operating Procedures =====
+{{ :brother_scanncut_dx_sop.pdf |Brother SOP}}
 ----
@@ Line 37: / Line 39: @@
   * Mat size: 12" x 12"
-  * Materials allowed:
+  * Material up to 3 mm thick
-    * Cardstock
+  * Materials that can be cut include: paper, sticker paper, vinyl, foam, fabric
-    * Chipboard <2mm
-    * construction paper
-    * corrugated cardboard
-    * poster board
-    * foil embossed
-    * metallic paper
-    * wax paper
-  * max material length 2 ft
 ----
@@ Line 53: / Line 47: @@
 ===== Reference Documentation =====
-[[Cricut SOP]]
-{{ :tools:cricut:01.a-reference-guide_pc_mac-dc-_1_-_1_.pdf |}}
-[[https://learn.cricut.com/maker/machine|Cricut Maker Quick Start]]
 -----