Differences

This shows you the differences between two versions of the page.

--- 2023_rates [2023/02/07 22:38] – bdincau
+++ 2023_rates [2026/02/05 21:55] (current) – removed bdincau
@@ Line 1: / Line 1: @@
-=====New Rates Table=====
-|              ^ Internal Rate            ^ External Rate         ^
-^ Staff Assistance   |  $17.53 / hr        |  $30.00 / hr        |
-^ Manager Assistance    |  $65 / hr      |  $170 / hr            |
-^ Silane Chamber    |  $5 / hr           |  $15 / hr        |
-^ Stratasys 3D Printers (F270,  Objet30)    |  $12.80 / hr  + material         |  $35 / hr  + material       |
-^ Other 3D Printers (MiiCraft, Ultimaker, FormLabs)    |  $6 / hr  + material        |  $16 / hr  + material       |
-^ Sonoplot   |  $35 / hr           |  $90 / hr         |
-^ Active Use (All other tools)    |  $20 / hr          |  $60 / hr        |
-This is a summary of the new recharge rates for the Microfluidics Lab and Innovation Workshop. These are expected to take effect sometime in the next 2-4 months. These rates are still subject to change, but it is unlikely that they will change more than few percent. (Pending feedback)
-Please review the new rates and contact the lab manager (bdincau@ucsb.edu) if you have any questions, concerns, or feedback.
-----
-=====How are the Rates Determined?=====
-The first step is to determine a **cost recovery rate**. This calculation considers total expenses and expected lab usage to determine a minimum rate for these facilities to break even.
-The next step is to then determine appropriate rate for internal and external users. Currently, these labs are partially subsidized, which allows us to set the internal rates **lower** than the cost recovery rate.