Differences

This shows you the differences between two versions of the page.

--- mini_drill_press [2020/10/02 18:41] – furst
+++ mini_drill_press [2023/01/06 00:11] – haley
@@ Line 4: / Line 4: @@
 ^                     Mini Drill Press           ^
 |                            {{:tools:microdrillpress:134.380_zoom.jpg?200|}}                                           |
-| **Tool Type:**                  "Drilling Tool"                           |
+| **Tool Type:**                  Drill press                          |
-| **Location:**                   "Innovations Workshop"                           |
+| **Location:**                   Innovation Workshop                           |
-|  **Supervisor**        |  **Tool Lead**  |
-|  David Bothman         |    |
-|  (805) 893-4125        |    |
-|  bothman@cnsi.ucsb.edu  |    |
-| **Description:**                "Drilling Press"                           |
+| **Description:**                Mini drill press                           |
-| **Manufacturer:**               "Cameron"                           |
+| **Manufacturer:**               Cameron                           |
 ----
 ===== About =====
+Micro drill press for use with small tools and drill bits on precision or fine work pieces. Features an unlimited speed control motor with high torque at low RPM.
+-----
+===== Safety Concerns =====
+  * Safety glasses, close toe shoes, and long pants must be warn when operating the machine
+  * Metal chips can be incredibly sharp, do not touch any chips directly instead using an acid brush to remove chips
+  * Do not inhale any fumes resulting from drilling using oil
+  * Do NOT wear gloves during operation of machine
+  * Do not touch tool or spindle until the machine has stopped completely
 ----
-=====Training=====
+===== Operating Procedures =====
+----
------
 ===== Detailed Specifications =====
+  * 1/7 HP DC motor
+  * 1000-30,000 RPM variable speed control
+  * Capable of drilling .002" to 5/32"
+  * Spindle run out within .0002"
+  * 4" X 4" work table
+  * J0 spindle taper
 -----
-===== Safety Concerns =====
+===== Reference Documentation =====
+[[Drill Press SOP]]
-----
+{{ :tools:microdrillpress:drill-press-instructions-2.pdf |}}
-===== Reference Documentation =====
+{{ :tools:microdrillpress:control-manual.pdf |}}
 -----