Differences

This shows you the differences between two versions of the page.

--- miicraft_50_sop [2020/08/14 19:25] – [How to Remove/Clean a Part] furst
+++ miicraft_50_sop [2020/08/17 17:44] – [Accident Response] furst
@@ Line 70: / Line 70: @@
     - Clean the base with IPA to remove any resin and place in a clean transport container
 ====How to Edit a Recipe:=====
-  - Let’s say you want to use a different layer thickness and therefore need a different recipe. Open
+  - Let’s say you want to use a different layer thickness and therefore need a different recipe. Open up the MiiPrinter window and click the edit icon to open a new window. Click the duplicate window and rename it with the resin and the layer thickness. Adjust the settings in the menu and save to create a new recipe.
-up the MiiPrinter window and click the edit icon to open a new window. Click the duplicate
+====Accident Response====
-window and rename it with the resin and the layer thickness. Adjust the settings in the menu
+**Accident:** A user leaves a build tray or foreign object inside the printer when starting a
-and save to create a new recipe.
+print. \\
+**Printer Response:** A mechanical error warning displays on screen. Printer is not responsive to
+computer commands and requires a hard reboot \\
+**Solution:**
+  - Press and hold power button for 2 seconds, then release.
+  - A dialogue on the printer window will appear asking if you wish to power down. Press and hold power button for 2 more seconds to completely power off machine.
+  - Wait 60 seconds, and then press power button to start the machine. This will initiate an automatic homing process that will raise the build platform to the top of the printer enclosure.
+  - Remove obstructions and refresh computer connection in MiiController Window
+**Accident:** Scratching glass projection plate or Teflon surface of the resin tank \\
+**Printer Response:** Print Quality is poor \\
+**Solution:**
+  - Replace build tank
+**Accident:** Build tray is not installed \\
+**Printer Response:** New prints will not start, build platform stand immersed in resin. \\
+**Solution:**
+**Accident:** Chemical spill of IPA or toxic resin \\
+**Solution:**
+====References====
+{{ :tools:miicraft50:miicraft125_manual_printerv1.5.pdf |MiiCraft Manual}} \\
+{{ :tools:miicraft50:miicraft_calibration_data.pdf |MiiCraft Calibration Data}} \\
+{{ :tools:miicraft50:resinworks3d_msds.pdf |ResinWorks MSDS}} \\
+{{ :tools:miicraft50:transferring_the_resin_sop.pdf | Transferring Resin SOP}} \\
+{{ :tools:miicraft50:ucsb-iw_miicraft_50_operating_checklist.pdf |Operations Checklist}}