hot_press
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
hot_press [2023/01/05 21:00] – haley | hot_press [2023/05/03 18:40] (current) – [Operating Procedures] bdincau | ||
---|---|---|---|
Line 43: | Line 43: | ||
5) Once your workpiece makes contact with the upper platen, you may read the pressure from the dial to the left of the press. Continue to raise the lower platen until the desired pressure is reached. | 5) Once your workpiece makes contact with the upper platen, you may read the pressure from the dial to the left of the press. Continue to raise the lower platen until the desired pressure is reached. | ||
- | 6) When you are finished pressing, release the hydrawlic | + | 6) When you are finished pressing, release the hydraulic |
7) Remove your sample from the press, then close the clear shield when finished. | 7) Remove your sample from the press, then close the clear shield when finished. |
hot_press.txt · Last modified: 2023/05/03 18:40 by bdincau